User guide

45
4. Entering and Editing Text/Symbols
WHEN there are no more characters to delete in a tag
AND the cursor is on the top left position in the first line,
pressing [Backspace] will quickly delete this tag (if it
is not the only tag left)!
L. Changing the Properties of Tags
To open the Properties menu:
1. Enter [Menu] > Quick Keys > Tag > “Properties”.
Shortcut: Enter [Fn] + [File] > “Properties”.
All changes in the Properties submenu are applied to the
current tag only. To apply properties to multiple tags, use
the “Apply Current Properties” option in the Tag menu.
To change a single-line tag to a multiline tag:
1. Enter [Fn] + [File] > Properties > Set Multiline >
“Multiline”.
2. In the Multiline list, select an option (“2 lines” or “3 lines”)
and press [OK].
3. Press [Close] to return to the Tag Editor.
Shortcut: Press [Fn] + [1] (or [2] or [3]) to quickly create a
one- (or two- or three-) line tag.
To change the content alignment of a tag:
1. Enter [Fn] + [File] > Properties > “Alignment”.
The Alignment menu appears, with the Horiz. submenu
highlighted in blue by default.
Shortcut: Press the [Fn] + [ ] quick keys.
2. Press [OK].
The options in the Horiz. submenu appear, with Center
highlighted by default.
3. Select an option (“Left”, “Center” or “Right”) and press [OK].
The Horiz. submenu is still highlighted in blue by default.
4. Select “Vertical” and press [OK].
The options in the Vertical submenu appear, with “Middle”
highlighted by default.
5. Select an option (“Top”, “Middle” or “Bottom”) and press
[OK].
6. Press [Close] to return to the Tag Editor.
To change the text orientation in a tag:
1. Enter [Fn] + [File] > Properties > “Rotation”.
Shortcut: Press the [
Backspace
Menu
Fn
File
Fn
File
OK
Fn
Fn
File
Fn
A/
A
A/
A
OK
OK
OK
OK
Fn
File
A/
A
A/
A
BMP91UG.book Page 45 Friday, October 14, 2011 7:56 PM
] quick key.