User guide

21
2. Setting Up Your Printer
3. Holding the battery
(with its label facing
upwards and its
metallic terminals away
from you), insert it into
the printer’s battery
compartment as shown
in the diagram here.
4. Ensure that the battery pack fits snugly in the battery
compartment.
If you cannot easily connect the battery pack terminals
to the printer’s battery compartment terminals, double-
check that the plus (+) and minus (-) terminal marks on
the two are correctly oriented.
5. Close the casing.
6. Press the [Power] key.
The printer starts up. The
Brady logo appears and
the last tag editing job
gets loaded on the LCD
screen.
To turn off the printer, press the [Power] key and then
the [OK] key.
OK
BMP91UG.book Page 21 Friday, October 14, 2011 7:56 PM