User guide

7
1. Before You Begin
E. Travelling with your BMP
®
91 printer
When traveling with a BMP
®
91 printer, follow these tips:
• Turn off the device by pressing [Power] and then [OK].
The printer will return the all mechanic parts to home position.
• Disconnect the USB cable and power adapter from the device.
To prevent damage, wait till all lights are completely
off before removing the battery or power cord.
• Remove the battery from the device if you will not be using the
printer for more than a month.
• When traveling to another country/region, bring the necessary
plug adapter with you.
• Use only the power adapter supplied with the device. Do not
use any other voltage transformer or converter. You can use AC
sources of 100–240 volts, 50/60 Hz.
• Place the printer and all its accessories in the original
packaging material. You can also put them in a Brady hard-
sided carrying case (optional) which has compartments for
ribbon/label/heat-shrink cartridges, power adapter, CD-ROM,
USB cable and Quick Start Guide/User Guide. (For more
information, contact your local Brady dealer.)
If you are bringing extra or partially used media
cartridges (whether ribbon, label, or heat-shrink tube), do
not leave them inside the printer. Otherwise, whilst
travelling, the medium in a cartridge may unwind. Load a
cartridge only after reaching your destination.
F. BMP
®
91 Specifications
System Specifications:
• Dimensions (L x W x H): 275 x 275 x 109 mm
• Weight: 2.58 kg (with battery, no consumables)
2.37 kg (without battery, no consumables)
• Output rate of up to 35 pcs/min (Note: segment length is
20 mm.)
• Thermal Transfer Print Head Resolution: 300 dpi
• Elastomeric Keypad
• 3.5” 320x240 pixel resolution, 256k colors TFT LCD display
• Maximum print width: 7 mm internal diameter (tubes), 12 mm
(labels)
• Maximum print length (segment length): 300 mm
• Number of prints per battery charge: Up to 4000
20 mm segments
• Time taken to deplete battery with continuous printing =
Appox. 2 hours
Future upgrades to the BMP
®
91 fi rmw a re ca n b e
downloaded from Brady’s website. Access
www.bradyid.com/BMP
®
91 or www.bradyid.com/ap
BMP
®
91, click Support > Downloads, then select
“BMP
®
91” from the list of products.
OK
BMP91UG.book Page 7 Friday, October 14, 2011 7:56 PM