User guide

94
7. Troubleshooting
22 Overwrite existing file? An attempt to save a new file which has the
same name as an existing file in the same
folder.
To overwrite, press [OK].
To abort operation, press [CLOSE].
23 Padding cannot be added for
alphabets.
Invalid characters are used in padding. Note: The only valid characters that can be used in
padding are zero (“0”) or a blank space (“ ”). For
more details, refer to the “H. To Add Serialization to
a Tag” section in “5. Advanced Functions”.
24 [MEF001] Power off printer.
Contact Brady for Tech
Support.
Error MEF001 is detected. Contact Brady Technical Support.
25 Printer cover is open. An operation was attempted while the cover is
opened.
Close cover and try again.
26 Serialisation values do not
correspond. Check the values
and try again.
This message will appear when the end value
of the serialization cannot be reached based
on the input. For example, if the increment is
“2”, the end value “9” cannot be reached.
Double-check the start, increment and end values.
For example, if the increment is “2”, change the end
value to an even number such as “8” or “10”.
Alternatively, change the increment value to an odd
number such that the end value “9” can be reached.
27 Power off printer? If the power button is pressed, this message will
appear to confirm whether you want to swtich
off the printer.
To power off, Press [OK].
To continue with printer operations, press [CLOSE].
28 This may cause data to be
truncated. Continue?
This message will appear when converting
properties of tag or converting job media.
To continue, press [OK].
To abort operation, press [CLOSE].
29 Unable to connect to PC.
Check your cable and try
again.
An attempt to cancel the PC connection mode
without a USB cable connection.
Go to PC connection mode. Check that the USB
cable is firmly connected or not damaged.
Message Description Action
BMP91UG.book Page 94 Friday, October 14, 2011 7:56 PM