User guide

93
7. Troubleshooting
13 Media jammed at platen/
wrap roller. Open cover and
remove media.
Tube or label or heat shrink tube is jammed at
the platen/wrap roller.
Open cover and remove the medium.
14 No external media. Load
media or press Cancel Print to
stop printing.
The end of media (external only) is detected
during printing.
Please load a new medium and press [OK] to
continue printing
15 No file to delete. An attempt to delete a file even though no files
has been selected in that folder.
Confirm the file folder and delete the file again.
16 No file to export. An attempt to export a file even though no files
has been selected in that folder.
Confirm the file folder and export the file again.
17 No file to import. An attempt to import a file even though no files
has been selected in that folder.
Confirm the file folder and import the file again.
18 No more media. Load media
and press OK to resume
printing.
The end of media (external or cartridge) is
detected during printing.
To return to the Tag editor, select [Cancel] and press
[OK].
To print again, reload the medium and press
[PRINT].
19 No media to remove. An attempt to eject the media even though
there is no media in the printer.
Continue with printer operations. If message appears
again, contact Brady Technical Support.
20 No more ribbon. Change
cartridge and press OK to
resume printing.
The end of the ribbon is detected while
printing.
Replace the empty ribbon cartridge with a new one.
21 Error mounting USB drive.
Remove your drive and try
again.
You are trying to read from a USB flash drive.
However, the printer cannot detect its presence.
Ensure that the USB flash drive is connected properly.
Re-insert if necessary.
Message Description Action
BMP91UG.book Page 93 Friday, October 14, 2011 7:56 PM