User`s manual

81
Printing
Adv Print
BMP71 User’s Manual
Adv print lets you indicate the number of copies to print. The default is to print collated,
printing each label set completely before the next copy is printed.
To print a number of copies:
1. Press Adv Print .
2. With the cursor in the No. of Copies field, enter the number of copies desired.
To get multiple copies of a serialization, first determine if the sequence should be collated or
non-collated.
Collated – All sequential numbers will print once, then the entire sequence prints again
Example: Collate three copies of Sequence 1-5
Produces 1,2,3,4,5; 1,2,3,4,5; 1,2,3,4,5
Non-collated – Prints all first numbers in a sequence, then all second numbers, etc.
Example: Print three copies of sequence 1-5, non-collated
Produces: 1,1,1; 2,2,2; 3,3,3; 4,4,4; 5,5,5.
The default is to print collated. If you do not want to collate the copies:
3. Navigate to the Collate option box and press OK or Enter to remove the
checkmark.
When printing (or re-printing) a single label in a series, or a range of labels in a series, use the
Print Range feature.
4. Navigate to the From field, under Print Range, and enter the number of the first label to be
printed.
5. Navigate to the To field, under Print Range, and enter the number of the last label to be
printed..