User`s manual

Labels and Areas
Rotate
58
BMP71 User’s Manual
Rotate
Rotation flips the data on a label or in an area, counter-clockwise, at 90° increments. Rotation
affects all data on a label or in an area.
Figure 21 • Degrees of rotation on printed label
NoteNote
If rotation is applied individually to areas, you cannot apply rotation to the entire
label.
Data cannot be rotated on a line-by-line basis. When adding a new area or label, the rotation is
the same as the previous area or label.
To rotate data:
1. Navigate to the label or area where rotation will take affect.
2. To set rotation for the label, press Label .
OR
To set rotation for an area, press Area .
3. Choose Rotate>degree of rotation.
4. Press OK or Enter .
NoteNote
If the auto font size is selected, rotated data is autosized to accommodate the height
vs. the width of the label. However, if using a fixed font size, the rotated data may
not fit on the label. If this occurs, an error message displays indicating rotated text
will not fit. The Rotate function is canceled and data is not rotated.