User`s manual

Arrow Tape
Adding Labels and Areas in Applications
108
BMP71 User’s Manual
If you want to change the category:
9. Navigate to the Category field and press OK or Enter .
10. From the drop down list, select the desired symbol category and press OK or Enter
.
11. Navigate to the Graphic #1 field and press OK or Enter to enter the field.
12. Navigate to the desired symbol and press OK or Enter .
The graphic number follows the navigation and displays below the selected graphic.
13. If more than one graphic is assigned, repeat Steps 11 and 12, above.
14. Navigate to the OK button and press OK or Enter .