User`s manual

103
Standard PipeMarker
Adding Labels and Areas in Applications
BMP71 User’s Manual
The EU Standard Pipemarker dialog requests some additional information. If using NA
Safety>Standard Pipemarker, proceed to Step 5.
4. In the Pipe Contents field, from the drop down list, select the property of the material
contained in the pipe to be labeled.
NoteNote
The contents and associated color combinations available in Pipe Contents are
based on the country specific Color Standards defined in Setup, Apps. (See “Setup
Apps” on page 29 for more information.)
5. In the PipeMarker Arrow Ends field, select the desired arrows from the drop down list.
If using the NA Safety>Standard PipeMarker, proceed to Step 7.
6. Navigate to the Set Text button and press OK or Enter .
7. In the Product Name field, enter the contents of the pipe or conduit. (E.g., Water, Gas,
Steam, etc.)
8. In the Comment 1 (optional) field, enter any additional text that should display on the
label. As the field name suggests, this field is optional.
9. Navigate to the Set Graphics button and press OK or Enter .
NA Safety>Standard PipeMarker EU Safety>Standard PipeMarker