User`s manual

Terminal Block, 66 Block
Adding Labels and Areas in Applications
90
BMP71 User’s Manual
4. In the Terminal Repeat field, indicate the size of the gap between each terminal (with a
minimum of 0.2 inches).
5. In the Number of Terminals field, enter the number of terminals on the block for which the
label is intended.
If you intend to use serialization for the Terminal Block label type, you do not need to enter the
Number of Terminals. The serialization values determine how many labels to create.
To serialize terminal block labels:
6. Navigate to the Serialize option box and press OK or Enter to select the
option.
7. In the Separator field, from the drop down list, select the separator to use.
Figure 33 • Separators and Orientation
8. In the Orientation field, from the drop down list, select the desired layout.
9. When finished, navigate to the OK button and press OK or Enter .
If the Serialize option box is checked, the Serial dialog box displays.
10. Complete the Serialization. (See “Add Serialization” on page 72 for more information.)
The number of terminal blocks are created as labels, with the serialization characters displayed
on each label.
If serialization was not used, on the Editing screen, enter unique data for each label, using [Alt
+ Up/Down] navigation key to move to the different labels.
Use Print Preview to view the labels before printing.
Line Separator, Vertical Orientation Tic Separator, Horizontal Orientation