User`s manual

BBP

33 Sign & Label Printer

User’s Manual

4-11

Printer Maintenance

Replacing the Media Wiper

Materials Required

• Media Wiper (5 pack) Kit, Cat #B31-WIPER (sold separately)

To replace the media wiper:

1. Remove power and media from the printer (see “Removing Power and Media

from Printer” on page 4-1).

2. LIft and hold the wiper arm while grasping the tab of the wiper insert [2].

3. Pull the tab slightly forward and then slide the wiper insert out of the wiper

arm.

4. To replace the wiper, insert the lip of the wiper insert into the slot [4] of the

wiper arm and slide in until the tab snaps into place.

5. Replace the ribbon and tape.

6. Close all covers and plug in the power cord.