User`s manual

BBP

33 Sign & Label Printer

User’s Manual

4-3

Printer Maintenance

Cleaning the Printer

Remove Dust

Dust generated by media cuts can accumulate in the unit. If a significant amount

of dust is built up, clean the unit using this procedure.

Materials Required

• Isopropyl Alcohol

• Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)

To clean dust from the printer:

CAUTION!

Always wear safety glasses when using compressed air.

1. Remove power and media from the printer (see “Removing Power and Media

from Printer” on page 4-1).

2. Using compressed air, spray all visible areas inside the printer to remove

accumulated dust.

3. Using a cloth moistened with isopropyl alcohol, wipe any remaining dust from

inside the printer.

4. Wipe exterior cover and frame of printer for dirt and residue.