User`s manual

BBP

33 Sign & Label Printer

User’s Manual

3-17

Tools

Diagnostics

Some diagnostics are not available for users. Advanced diagnostics are password

protected and to be used only with Brady Technical Support. The password is

assigned by Brady.

Enter Diagnostic Mode

Use this procedure to access any of the diagnostics menus.

To enter diagnostics mode:

Note: A password is required to access the Advanced Diagnostics menus.

1. Press

to go to the navigation menu.

2. Press S or T to scroll to Tools, the press to go to the submenu.

3. Press T to scroll to Diagnostics, then press to go to the diagnostics list.

4. When done, press

to exit the test.

Sensors

Print Engine Base (PEB) Settings

This procedure displays the PEB settings on the printer.

To view the PEB settings:

1. Access Diagnostic mode (see “Enter Diagnostic Mode” on page 3-17).

2. Press to select Sensors.

3. Press to select PEB Settings. The PEB settings display results for the

following:

4. Press W repeatedly to exit to the main menu or to return to the PEB

Settings menu.

CutLine - Lead.

xxxx

Leading - Print

xxxx

Print - Diecut

xxxx

Diecut - Tapeout

xxxx

Rocker Steps

xxxx

Print - Center

xxxx