User`s manual

3-16 BBP

33 Sign & Label Printer

User’s Manual

Tools

Upgrade from USB Flash Drive

Use this procedure to upgrade the firmware or software from a USB flash drive

that contains the upgrade. The system will support only one USB device at a time.

To upgrade software from a USB flash drive:

CAUTION!

Do not interrupt power during an upgrade from a USB flash drive.

1. Copy the upgrade files to the root directory of your USB flash drive.

2. Connect the USB flash drive to any available USB port on the printer.

3. Press

to go to the navigation menu.

4. Press S or T to scroll to Tools, then press .

5. Press T to scroll to Upgrade from USB, then press . The printer

automatically downloads and installs the firmware/software from the root

directory of the USB flash drive.

Note: During the upgrade, the screen goes blank. It may take a few moments

for the upgrade to complete. When done, the printer returns to the Ready

menu.