User`s manual

3-10 BBP
®
33 Sign & Label Printer User’s Manual
Tools
Import
Tools
Import
Import lets you add your own graphics or fonts for use on the printer.
Graphics
Use this procedure to add your own graphics for use in labels that you create on
the printer.
Imported graphics must be in one of the following supported format(s) and
imported from a USB flash drive.
• Bitmap (.bmp)
• Graphics Interchange Format (.gif)
• Joint Photographic Experts Group (.jpg)
• Portable Network Graphics (.png)
Note: This is a monochrome printer. Imported graphics should be black and white.
Bitmap files (e.g., *.bmp, .jpg, etc.) are composed of pixels which may appear fuzzy
and become distorted when they are resized.
To import a graphic:
1. Copy the desired graphic(s) to the root directory of your USB flash drive (not in
a folder).
2. Connect the USB flash drive to any available USB port on the printer.
3. Press
to go to the navigation menu.
4. Press S or T to scroll to Tools, then press .
5. Press T to scroll to Import, then press .
6. Press T to scroll to Import Graphics, then press .
7. Press T to scroll to the desired USB flash drive, then press .
8. Press S or T to scroll through the list of graphics on your USB flash drive,
then press to accept. The graphic will be imported to your printer.
Note: Only one graphic can be imported at a time.
9. When done, press W repeatedly to exit to the main menu.