User`s manual

3-8 BBP
®
33 Sign & Label Printer User’s Manual
Printer Settings
Connection
Date & Time
The Date & Time menu lets you change the date and time format
(i.e., 12-hour or 24-hour clock). Use the same steps to change any of the submenu
options.
To change date & time options:
1. Press to go to the navigation menu.
2. Press S or T to scroll to Printer Settings, then press .
3. Press T to scroll to Date & Time, then press .
4. Press S or T to choose the option you want to change (i.e., Date, Time or
Format), then press .
5. Use the S or T arrows to select and change the selection, then press .
6. Continue to select options you want to change, using the arrow keys and
pressing to accept the changes.
7. When done, press W repeatedly to exit to the main menu.
Connection
The printer has three ready modes:
• Initializing : The printer is ready, but the connection to the Brady Network Card
(BNC) module has not yet been established.
•
Ready : The printer is fully functional, the BNC module has responded and the
printer is ready to print.
•
Ready - USB Only : The printer cannot make a connection to the BNC
module. All other functions are ready and the printer can be used. If the BNC
module does not respond before the time-out, the following message will
display:
Brady Network Card is not responding. USB printing is still
available. See User's Manual for details.
Note: To view the status of the BNC card and possible corrective actions, see
“Troubleshooting Brady Network Card” on page 2-34.