User`s manual

BBP
®
33 Sign & Label Printer User’s Manual 3-1
3 User Interface Menu
The User Interface (UI) menu provides feedback and also allows you to access and
change printer settings, printer status and tools. A 5-way navigation keypad lets you
navigate through the menu structure to choose the option(s) you want.
In Ready mode, the UI menu indicates
printer status and displays estimated remaining
material and ribbon.
In Menu Selection mode, the display changes to a navigation-type
menu. Navigation is divided into 6 major functions:
• Cut Media
• Status Info
• Output Settings
• Printer Settings
• Tools
• USB Flash Drive
Cut Media
Selecting Cut Media from the menu sends a signal to the printer telling it to cut the media.
To set the cut option:
1. Press to go to the navigation menu. Cut Media is the first option.
2. When you are ready to cut, press . The printer cuts at the current position of the
media.
Note: The menu stays on Cut Media until you exit the menu.
3. When done, press W to exit to the main menu.