Datasheet

Technical Data Sheet
Clamp On Breaker Lockout Cleat Attachments
TDS No. LOTO-17
Effective Date: 10/09/2017
Description:
Design
● To be used in conjunction with clamp-on
breaker lockouts (both 120v and 480v)
● Easily clips onto the bottom of the lockout
body
● Assures positive restraint for breakers with
long, sliding switch throws
Material
Chemical
°C
Chemical
°C
● Body: Polypropylene
◌ Color: Housing – Red
● UL Rating: UL 94 – HB (Plastic Component
Only)
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
Temperature Range
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
● Polypropylene: -20° to 80°C (0° to 175°F)
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Chemical Resistance
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only.
Dimensions
120/277V
480/600V
"A"
0.33” [8.37mm]
0.49” [12.36mm]
"B"
0.19” [4.95mm]
0.25” [6.35mm]
"C"
0.71” [18.06mm]
1.89” [48.11mm]
"D"
0.59” [15.01mm]
1.13” [28.59mm]
"E"
2.0” [50.74mm]
2.7” [68.58mm]
"F"
1.13” [28.70mm]
2.34” [59.44mm]
"G"
0.29" [7.37mm]
0.39” [9.78mm]
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product
or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no
independent representations or warranties expressed or implied, and assumes no liability in connection with the use of this information.
Circuit Breaker Cross Reference Guide
Circuit Breaker
Manufacture
Breaker
Type
# of
Poles
Circuit Breaker
Manufacture
Breaker Type
# of
Poles
Circuit Breaker
Manufacture
Breaker
Type
# of
Poles
Circuit Breaker
Manufacture
Breaker
Type
# of
Poles
American Ckt.
Bkr.
NEF
3
Cutler Hammer
QHCW
1
General Electric
TQD
2-3
Square D
KA
2-3
American Switch
C
1
Cutler Hammer
QHCX
1
General Electric
TQL-A
1
Square D
KAL
2-3