Datasheet
Technical Data Sheet
Corrosion-Resistant Group Lockout Hasps
TDS No. LOTO-66
Effective Date: 10/16/2017
Description:
Design
● Manufactured from 12 gauge steel that is
epoxy coated to give superior resistance to
rust and added dielectric strength
● Yellow plastic coating is added to lock area for
visibility
● Available in 1" and 1 1/2" diameter jaws
● Standard package: 1 hasp
Material
● Steel with Epoxy Coating
● Vinyl Coating: Yellow
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Temperature Range
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
● Steel: -30°F to 350°F (-35°C to 177°C)
● Vinyl Coating: -30°F to 200°F (-35°C to 95°C)
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Chemical Resistance
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only.
Dimensions
A
-
2.3” [54.4mm]
B
-
5.09” [129.3mm]
C
-
1.0” [25.4mm] or 1.52”
[38.7mm]
D
-
0.47” [12mm]
E
-
0.4” [10mm]
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product
or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no