Datasheet

CUSTOM AND SPECIALTY PRODUCTS
165
When performance matters most
Security Labels
Water Indicating Labels
WEEE: Waste from electrical & electronic equipment
Order Labels Label Size
Reference Per Pack Diameter (mm) Colour Legend
WTP-6 9 19.00 Blue on White GUARANTEE VOID IF SEAL IS BROKEN
WTP-7 20 16.00 Black on White CALIBRATION VOID IF SEAL IS BROKEN
Order Size Labels Per Sheets Per
Reference (mm) Sheet Pack
CE-1 7.62 x 6.35 100 5
CE-2 12.70 x 12.70 25 20
CE-3 19.05 x 19.05 20 25
Before
After
●
Designed for sealing access points,
protecting adjustments
and sealing enclosures
●
Custom sizes, colours and shapes
available
●
Provides clear evidence of water contact – turns from white to red
●
Colour change becomes permanent, even after prolonged
submersion in water
●
Withstands heat and humidity aging without false indication
●
Custom sizes and shapes available
Order Pieces Label Size Web Width Colour
Reference Per Roll (mm) (mm) Change
THT-70-350-20* 20 000 6.35 x 6.35 60.20 Red
WIL-1-350-5 5 000 dia. 4.10 50.80 Red
WIL-1-350-20 20 000 dia. 4.10 50.80 Red
* The THT parts are provided in a format and size acceptable for thermal transfer printing. See Thermal Transfer Labels section for
more details.
Water Indicating Polyester / Paper (B-350)
B-7616/B-7554
CE Labels
Order Size
Reference (mm) Colour Labels Per Roll
805532 10 x 13 White on Black 500
805533 10 x 13 White on Black 5 000
805534 15 x 20 White on Black 500
805535 15 x 20 White on Black 5 000
805870 10 x 13 Black on White 500
805809 10 x 13 Black on White 5 000
805810 15 x 20 Black on White 500
805811 15 x 20 Black on White 5 000
●
This directive requires the collection and treatment of electronic
and electrical equipment (EEE) at the end of the products life
●
Effective from August 13th, 2005
●
The EEE that needs to be collected in mainland Europe has to be
properly identified as from August 13th, 2005
●
The WEEE marking is defined in EN 50419 and crossed out wheeled
bin with bar is one of the correct methods
●
Every producer has to organise a ‘take back supply chain’ or has
to register to a collection scheme in every EU member state
●
Every producer must provide information on re-use and treatment for
new EEE within one year of palcing it onto the market, in order to
inform reuse centres, treatment and recycling facilities.