Datasheet
Technical Data Sheet
Prinzing Electrical/Pneumatic Plug Lockout
TDS No. LOTO-32
Effective Date: 10/10/2017
Description:
Design
● Accommodates a large variety of electrical
plugs up to 3 1/2" in diameter and 5" in
length, as well as male air hose connectors
● Holes accommodate electrical cord of "necked
down" pneumatic male fittings commonly
attached to compressed air hose
● Works on 110V, 220V, and 550V plugs
Material
Chemical
°C
Chemical
°C
● Housing: High Impact Polystyrene
● Color: Red (PMS 1805C)
● UL Rating: UL 94 - HB
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Temperature Range
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
● Polystyrene: -20° to 80°C (0° to 175°F)
Fuel, engine: Gasoline (normal
& premium grade)
85
Trichloroethane 1,1,1
45
Chemical Resistance
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only.
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture
(15% methanol)
70
Water (including seawater)
25
Dimensions
“A”
–
0.31” [8.0mm]
“B”
–
3.78” [96mm]
“C”
–
6.42” [163mm]
“D”
–
4.62” [117.25mm]
“E”
–
0.23” [5.75mm]
"F"
–
0.20” [5.20mm]
"G"
–
0.15” [3.93mm]
"H"
–
0.14” [3.60mm]
"I"
–
0.37” [9.35mm]
"J"
–
0.22” [5.5mm]
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this
product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady
makes no independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this
information.
Details:
MSDS Information
1. HAZARDS IDENTIFICATION
This product is NOT DANGEROUS and contains no hazardous ingredients
2. FIRST AID MEASURES/HEALTH INFORMATION PROTECTION
Eye Contact:
Not applicable, product is inert
Ingestion:
Not applicable, first aid is not normally required.
Inhalation:
Not applicable