Datasheet

Technical Data Sheet
Prinzing Ball Valve Lockout
TDS No. LOTO-22
Effective Date: 10/09/2017
Description:
Design
● Made from ultra tough polypropylene
● Small lockout locks OUT pipes 1/2" to 2.5" in
diameter, and can also be used to lock valves
OPEN on pipes from 1/2" to 1.25" in diameter
● Large lockout locks out pipes 2" to 8" in
diameter
● Available in four colors
Material
Chemical
°C
Chemical
°C
● Polypropylene
◌ Colors: Red, Yellow, Blue, and Green
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Temperature Range
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
● Polypropylene: -20° to 80°C (0° to 175°F)
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Chemical Resistance
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only.
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Dimensions
Small
Large
“A”
–
0.29”[7.24mm]
0.33” [8.40mm]
“B”
–
5.29”[134.29mm]
12.00” [305mm]
“C”
–
0.57” to 2.07”
[14.5mm to 52.5mm]
2.00” to 7.87”
[50mm to 200mm]
“D”
–
3.05”[77.47mm]
4.65” [118mm]
“E”
–
4.07”[103.45mm]
8.66” [220mm]
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product
or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no
independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information.
Details: