Datasheet

Technical Data Sheet
Snap On 120v Circuit Breaker Lockout
TDS No. LOTO-15
Effective Date: 10/09/2017
Description:
Design
Designed for 120v circuit breaker switches
that have holes in the switch tongue
Quick and easy - just snap into place and
apply padlock!
Dual cavities accommodate different sized
switch tongues, and durable metal pins add
additional security
Accepts lock shackles up to 9/32" in diameter
Material
Body: Nylon 66
○ Color: Red (PMS 1805C)
Dowel pin: Stainless Steel
UL Rating: UL 94 – HB (Plastic Components
Only)
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
Temperature Range
Nylon 66: -20° to 120°C (-4° to 250°F)
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Chemical Resistance
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only.
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Dimensions
“A”
“B”
“C”
“D”
“E”
“F”
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document
are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting
specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should
contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product
or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no

Summary of content (4 pages)