Datasheet

ManualsBrandsBrady ManualsLockoutsLarge Universal Valve Lockout with Sheathed Cable & Blocking Arm

Technical Data Sheet

Universal Valve Lockout

TDS No. LOTO-24

Effective Date: 10/09/2017

Description:

Design

● Versatile, lightweight, and rugged device is

easy to use and can lock out numerous

types of valves!

● Made of industrial-grade steel and nylon for

extra impact and chemical resistance

● Can be used to lock out large levers,

T-handles and other hard to secure

mechanical devices with cable and arm

attachments

● Small UVLO: for use on handle widths up to 1"

(max handle thickness of 0.6")

● Large UVLO: for use on handle widths up to

1.6"(max handle thickness of 1.1")

Material

● Body, arm: Glass-filled nylon—Red (PMS

1805C)

● Locking piece: Glass-filled nylon—Black

● Teeth, screw, pin, spring: Stainless steel

● Threaded insert: brass

Chemical

°C

Chemical

°C

Acetone

Petroleum

Acetone

Turpentine oil

Chlorine, chlorine water

Turpentine substitute (white spirit)

Fuel, engine: Gasoline (normal &

premium grade)

Trichloroethane 1,1,1

Temperature Range

Lubrication oil: gear oil

< 120

Lubricating oil: HD engine oils,

hydraulic oils, transformer oils

< 120

Glass-filled Nylon: -20° to 120°C (0° to 250°F)

Fuel, engine: M15 mixture (15%

methanol)

Water (including seawater)

Chemical Resistance

All approved chemicals listed are based on the

manufactures specified chemical resistance chart for

plastic material only.

Methanol

Water (including seawater),

chlorinated (<0,5 mg/l)

Dimensions

Large

Small

-

8.82” [224.1mm]

6.20” [157.5mm]

-

0.39” [9.91mm]

-

6.38” [162.0mm]

5.6” [142.2mm]

-

0.200” to 1.0”

[5.0mm to 24.5mm]

0.125” to 0.500”

[3.2mm to 13mm]

-

1.55” [39.4mm]

0.90” [22.9mm]

-

7.05”[179.1mm]

6.05”[153.7mm]

-

0.37” [9.5mm]

Warranty

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document

are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting

specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should

contact Brady for further information.

Summary of content (3 pages)

PAGE 1
Technical Data Sheet Universal Valve Lockout TDS No. LOTO-24 Effective Date: 10/09/2017 Description: Design ● Versatile, lightweight, and rugged device is easy to use and can lock out numerous types of valves! Made of industrial-grade steel and nylon for extra impact and chemical resistance Can be used to lock out large levers, T-handles and other hard to secure mechanical devices with cable and arm attachments Small UVLO: for use on handle widths up to 1" (max handle thickness of 0.
PAGE 2
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information. Details: MSDS Information 1. 2.
PAGE 3
None of the materials in this product are Recyclable, dispose of all materials in accordance with an a pplicable federal, state, and local law. 11. TRANSPORT INFORMATION No data available 12. REGULATORY INFORMATION This product has been tested and validated t o the Regulatory Requirements listed below. • 13. OSHA 29 CFR 1910.