Datasheet

Miniature Circuit Breaker Lockout - Universal Fit
Design
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal &
premium grade)
85
Trichloroethane 1,1,1
45
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture (15%)
methanol)
70
Water (including seawater)
25
Methanol
25
etc.
xx
● One lockout device fits numerous ABB, Hager,
Siemens and Schneider mini-circuit breakers
● Low-profile design allows for panel door closure
● Complete lockout by attaching a Brady safety
padlock with shackle diameter up to 9/32“
● Quick and easy installation with no tools required
● Works on both single- and multi-pole breakers
● Made from durable, fiberglass reinforced nylon
● Available in single and six (6) packs
Material
● Body: Glass Filled Nylon
○ Color: Black
● Cover: Glass Filled Nylon
○ Color: Red - (PMS 1805C)
● Thumbwheel: Glass Filled Nylon, Stainless Steel
○ Color: Black
● Spring: Music Wire Steel
● UL Rating: UL94 - HB Rating
Temperature Range
● Glass Filled Nylon: -20° to 120°C (-4° to 250°F)
Chemical Resistance
If desired, list all approved chemicals based on the
manufacturer’s specified chemical resistance chart for
component materials. See table at right with sample chemicals
and temperatures:
Dimensions
List dimensions with appropriate labels:
“A”
–
2.39” [60.7 mm]
“B”
–
0.68” [17.2 mm]
“C”
–
1.15” [29.2 mm]
“D”
–
2.39” [60.7 mm]
“E”
–
0.34” [8.60 mm]
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information
only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop
specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing
using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties expressed or
implied, and assumes no liability in connection with the use of this information.