Datasheet

ManualsBrandsBrady ManualsLockout AccessoriesSafety Lock & Tag Carrier, Yellow

Safety Lock & Tag Carrier (Green, Blue, Yellow, and Red)

Design

Chemical

°C

Chemical

°C

Acetone

Petroleum

Acetone

Turpentine oil

Chlorine, chlorine water

Turpentine substitute (white spirit)

Fuel, engine: Gasoline (normal &

premium grade)

Trichloroethane 1,1,1

Lubrication oil: gear oil

< 120

Lubricating oil: HD engine oils,

hydraulic oils, transformer oils

< 120

Fuel, engine: M15 mixture (15%)

methanol)

Water (including seawater)

Methanol

Water (including seawater),

chlorinated (<0,5 mg/l)

Simplifies carrying and storage of locks, hasps,

tags and keys. Includes:

• 3 carabineers to hold hasps, tags & join 2 carriers

back-to-back

• Coiled strap holds operating keys.

• 3 write-on Lockout Procedure Template tags

• Offset design permits flush wall mounting with

locks in place.

Material

● Lock Carrier: molded Glass-filled Nylon

○ Color: Green, Blue, Yellow, or Red

● D Clips: Aluminum

○ Color: Black

● Split Ring: Steel

● Cable: Vinyl Sheathed Steel

● UL Rating: UL 94 – HB (Plastic Components Only)

Temperature Range

● Glass-filled Nylon: -20° to 120°C (0° to 250°F)

Chemical Resistance

All approved chemicals listed are based on the

manufacturer’s specified chemical resistance chart for plastic

material only.

Dimensions

List dimensions with appropriate labels:

“A”

–

7.64” [194.05 mm]

“B”

–

1.06” [26.99 mm]

“C”

–

5.19” [131.72 mm]

Warranty

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information

only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop

specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing

using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties expressed or

implied, and assumes no liability in connection with the use of this information.

Summary of content (3 pages)

PAGE 1
Safety Lock & Tag Carrier (Green, Blue, Yellow, and Red) Design Simplifies carrying and storage of locks, hasps, tags and keys. Includes: • 3 carabineers to hold hasps, tags & join 2 carriers back-to-back • Coiled strap holds operating keys. • 3 write-on Lockout Procedure Template tags • Offset design permits flush wall mounting with locks in place.
PAGE 2
MSDS Information 1. HAZARDS IDENTIFICATION This product is NOT DANGEROUS and contains no hazardous ingredients. FIRST AID MEASURES/HEALTH INFORMATION /PROTECTION 2. Eye Contact: Not applicable, product is inert Ingestion: Not applicable, first aid is not normally required. Inhalation: Not applicable Skin Contact: Not applicable, product is inert, except if product is melted use gloves.
PAGE 3
8. STABILITY AND REACTIVITY 8.1 Conditions to Avoid Higher Temperatures and direct sunlight (chemical resistance is excellent) Highly stable, but temperatures over 480 F may cause degradation 8.2 Materials to Avoid No data available 8.3 Hazardous Decomposition Products Under fire and oxygen-lean conditions may cause monoxide and irritating smoke 9. ECOLOGICAL INFORMATION 9.1 Ecotoxicity No data available 9.2 Mobility No data available 9.3 Persistence and Degradability No data available 9.