Datasheet

Design
● Single device that can be used with most major multi-pole
breakers that employ a tie bar.
● Versatile device that is compatible with most name-brand
manufacturers, such as GE, ITE, Sylvania, Cutler-Hammer,
Challenger, Bryant, Siemens, Square D, and General
Switch Company.
● Secure with 50 lb. minimum strength non-releasable nylon
fasteners (shown) or padlock
Material
● Slide and Body made of Glass-filled Nylon
● Color: Slide and Body – Red (PMS 1805C)
● Stainless Steel screw with over molded Glass-filled Nylon
thumbscrew.
● Color: Thumbscrew - Black
● Fasteners - Nylon
● UL Rating: 94-HB
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal
& premium grade)
85
Trichloroethane 1,1,1
45
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture
(15% methanol)
70
Water (including seawater)
25
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Temperature Range
● Glass-filled Nylon: -20° to 120°C (0° to 250°F)
Chemical Resistance
All approved chemicals listed are based on the manufactures
specified chemical resistance chart for plastic material only. All other
materials in the device are made of steel.
Dimensions
“A”
–
2.100” [53.3mm]
“B”
–
2.450” [62.2mm]
“C”
–
0.300” [7.6mm]
“D”
–
0.610” [15.5mm]
“E”
–
1.300” [33.0mm]
“F”
–
0.312” [7.9mm]
pg. 1 of 4