Datasheet
Design
● Extremely versatile device, works on a wide range of single-pole
breakers
● Secure with 50 lb. minimum strength non-releasable nylon
fasteners (shown) or padlock
● Made of rugged polypropylene and impact modified nylon
● Use thumbscrew to clamp lockout securely onto switch
tongue, then pull cover over thumbscrew and lock in place to
prevent clamp from being loosened
● Blade design provides tighter grip with less torque on
thumbscrew
● Accepts lock shackles up to 9/32" in diameter, and comes with
detachable cleats to expand the range of applicable breakers
Material
Chemical
℃
Chemical
℃
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white
spirit)
25
Fuel, engine: Gasoline
(normal & premium grade)
85
Trichloroethane 1,1,1
45
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture
(15%) methanol)
70
Water (including seawater)
25
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
● Taglock, Cleat and Body - Polypropylene
● Color: Body Red (PMS 1805C)
● Slide, Slidelock and Thumbscrew - Glass-filled Nylon
● Color: Black
● Screw and Blade - Stainless Steel
● UL Rating: UL 94 – HB
Temperature Range
● Polycarbonate: -40° to 115°C (-40° to 239°F)
Chemical Resistance
All approved chemicals listed are based on the manufactures specified chemical
resistance chart for plastic material only. All other materials in the device are made
of steel.
Dimensions
pg 1 of 5