Datasheet

T
Design
● Designed for 120v circuit breaker switches that have holes
in the switch tongue
● Quick and easy - First snap device into place by positioning
the smaller rectangular cavity around the breaker switch if it
fits; otherwise position the larger opening.
● Secure with 50 lb. minimum strength non-releasable nylon
fasteners as shown, or padlock
● Dual cavities accommodate different sized switch tongues,
and durable metal pins add additional security
Material
● Body - Glass filled Nylon
● Color: Red (PMS 1805C)
● Dowel pin: Stainless Steel
● Fasteners - Nylon
● UL Rating: UL 94 – HB
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline (normal
& premium grade)
85
Trichloroethane 1,1,1
45
Lubrication oil: gear oil
< 120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Temperature Range
● Nylon 66: -20° to 120°C (-4° to 250°F)
Chemical Resistance
All approved chemicals listed are based on the manufactures
specified chemical resistance chart for plastic material only.
Dimensions
A
0.620" [15.8mm]
B
1.006" [25.6mm]
C
2.696" [68.5mm]
D
0.293" [7.4mm]
E
2.159" [54.8mm]
Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 414-228-5770
Y4282464
pg. 1 of 4