Datasheet

Design
● Extremely versatile device, works on a wide range of single-pole
breakers
● Secure with 50 lb. minimum strength non-releasable nylon fasteners
(shown) or padlock
● Made of rugged polypropylene and impact modified nylon
● Use thumbscrew to clamp lockout securely onto switch tongue, then
pull cover over thumbscrew and lock in place to prevent clamp from
being loosened
● Blade design provides tighter grip with less torque on thumbscrew
● Accepts lock shackles up to 9/32" [7.1mm] in diameter, and comes
with detachable cleats to expand the range of applicable breakers
Material
Chemical
℃
Chemical
℃
Acetone
25
Petroleum
25
Acetone
60
Turpentine oil
25
Chlorine, chlorine water
25
Turpentine substitute (white spirit)
25
Fuel, engine: Gasoline
(normal & premium grade)
85
Trichloroethane 1,1,1
45
Lubrication oil: gear oil
<120
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Fuel, engine: M15 mixture
(15% methanol)
70
Water (including seawater)
25
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
● Taglock,Cleat and Body - Polypropylene
● Color: Body – Red (PMS 1805C)
● Slide, Slidelock and Thumbscrew = Glass-filled Nylon
● Screw and Blade - Stainless Steel
● Color: Slide, Sidelock and Thumbscrew - Black
● UL Rating: UL 94 - HB
●
Temperature Range
● Polypropylene Housing: : -20° to 80°C (0° to 175°F)
● Glass-filled Nylon: -20° to 120°C (0° to 250°F)
Chemical Resistance
All approved chemicals listed are based on the manufactures specified
chemical resistance chart for plastic material only. All other materials in
the device are made of steel.
Dimensions
“A”
–
3.723” [94.56mm]
“B”
–
3.185” [80.90mm]
“C”
–
0.302” [7.66mm]
“D”
–
1.610” [40.89mm]
“E”
–
0.574” [14.58mm]
“F”
–
1.892” [48.07mm]
“G”
–
2.175” [55.25mm]
pg. 1 of 4