Datasheet

Technical Data Sheet
Small 110V Plug Lockout
TDS No. LOTO-5
Effective Date: 10/11/2017
Description:
Design
● Plug lockouts prevent electrical plugs from
being inserted into a wall outlet, for use when
a plug will not remain under the exclusive
control of the person performing service or
maintenance
● Made of rugged polypropylene and supplied
with Danger labels
Material
● Housings made of Polypropylene
● Color: Outer Housing – Red (PMS 1805C)
● UL Rating: UL 94 - HB
Temperature Range
● Polypropylene Housings: -20° to 80°C (0° to
175°F)
Chemical
°C
Chemical
°C
Acetone
25
Petroleum
25
Acetone
60
Lubricating oil: HD engine oils,
hydraulic oils, transformer oils
< 120
Chemical Resistance
Lubrication oil: gear oil
< 120
All approved chemicals listed are based on the
manufactures specified chemical resistance chart for
plastic material only. All other materials in the device
are made of steel.
Fuel, engine: M15 mixture (15%
methanol)
70
Water (including seawater)
25
Methanol
25
Water (including seawater),
chlorinated (<0,5 mg/l)
80
Dimensions
“A”
–
3.150” [80.0mm]
“B”
–
3.500” [88.9mm]
“C”
–
0.500” [12.7mm]
MAX
“D”
–
1.700” [43.2mm]
“E”
–
3.200” [81.3mm]
“F”
–
0.364” [9.2mm]
MAX
Warranty
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are
for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified
performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for
further information.