Installation manual

Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve
TDB3103, WF3203 Installation Instructions
Bradley Corporation • 215-1479 Rev. G; EN 06-915
2 2/8/07
Pre-Installation Information
IMPORTANT: Read this entire installation manual to ensure proper installation.
IMPORTANT: Flush all the water supply lines before making connections.
Air Metering valve
The sprayhead is controlled by a pushbutton cylindrical air valve, allowing the user to activate a
flow of water.
Supplies required for installation:
• (4) 1/2" lag bolts, screws or other fasteners to anchor washfountain pedestal
• 1/2" hot and cold water supply lines and fittings (refer to rough-ins on page 6)
• Reducing fittings and 1/2" nom. copper tubing supply lines for types with supplies from
above
• Standard P-trap (refer to rough-ins on pages 5-7)
• 1-1/2" drain lines and fittings (refer to rough-ins on pages 5-7)
• Teflon tape or pipe dope
Terreon® Semi-circular Washfountain Warranty
Product warranties may be found under “Product Information” on our website at www
.bradleycorp.com