Installation manual

ManualsBrandsBradley ManualsHome building and DecorWF3203

Installation

Instructions

TDB3103

Terreon

36" Semi-Circular

Deep Bowl Washfountain with Air

Metering Control

WF3203

Terreon

Extra Height 36" Semi-

Circular Classic Washfountain with

9" Deep Bowl and Air Metering

Control

215-1479 Rev. G; EN 06-915

Page 1 of 24 2/8/07

P.O. Box 309, Menomonee Falls, WI 53052-0309

TEL. 1-800-BRADLEY FAX 262-251-5817

http://www.bradleycorp.com

Main water supply to the unit

should be ON at all times.

This installation manual and parts

list should be filed by the owner’s

maintenance department.

IMPORTANT

Table of Contents

Pre-Installation Information . . . . . . . . . . . . . . . . . 2

Model TDB3103 Washfountain Dimensions . . . . 3

Model WF3203 Washfountain Dimensions . . . . . 4

Washfountain Rough-Ins . . . . . . . . . . . . . . . . . . 5-7

Installation Instructions . . . . . . . . . . . . . . . . . . .7-12

Vernatherm Adjustment Instructions . . . . . . . . . .13

Terreon® Cleaning/Maintenance . . . . . . . . . . . . .14

Gel-Coated Fiberglass Cleaning/Maintenance . . .14

Stainless Steel Cleaning/Maintenance . . . . . . . . .15

Soap Dispensing Valve Repair Parts . . . . . . . .16-17

Soap Recommendations and Maintenance . . . . . .18

Sprayhead Troubleshooting/Repair Parts . . . . . . 19

Actuator Module Assembly Components . . . . . .20

Metering Air Valve Maintenance . . . . . . . . . .20-22

Thermostatic Mixing Valve Troubleshooting .23-24

Cleaning the Strainer . . . . . . . . . . . . . . . . . . . .23-24

TDB3103

WF3203

Summary of content (118 pages)

PAGE 1
Installation Instructions TDB3103 Terreon® 36" Semi-Circular Deep Bowl Washfountain with Air Metering Control A D A CO M PL IA NT WF3203 Terreon® Extra Height 36" SemiCircular Classic Washfountain with 9" Deep Bowl and Air Metering Control TDB3103 Table of Contents Pre-Installation Information . . . . . . . . . . . . . . . . . 2 Model TDB3103 Washfountain Dimensions . . . . 3 Model WF3203 Washfountain Dimensions . . . . . 4 Washfountain Rough-Ins . . . . . . . . . . . . . . . . . .
PAGE 2
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Pre-Installation Information IMPORTANT: Read this entire installation manual to ensure proper installation. IMPORTANT: Flush all the water supply lines before making connections. Air Metering valve The sprayhead is controlled by a pushbutton cylindrical air valve, allowing the user to activate a flow of water.
PAGE 3
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Semi-Circular Washfountain Dimensions Model TDB3103 36" Semi-circular - side view Top view 22-3/4" (577) 14-1/16" (357) Model TDB3103 ADA Compliant Optional equipment may not comply with all ADA dimensional guidelines 4-3/4" (121) 13-1/2" (343) 36" (914) 6" (152) 14" (356) Back view *53-1/4" (1353) 8" (203) *44-7/8" (1140) *41-1/4" (1048) *34" (864) *38" (965) *24-1/2" (622) *3
PAGE 4
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Semi-Circular Washfountain Dimensions Model WF3203 36" Semi-circular - side view Top view 6" (152) Back view Figure 1b Bottom View 4 2/8/07 Bradley Corporation • 215-1479 Rev.
PAGE 5
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Semi-Circular Washfountain Rough-Ins 1" (25mm) 1-1/2" NPT DRAIN FROM THE WALL PEDESTAL OPENING AT WALL 9" (229mm) HOT 34" (864mm) RIM HEIGHT* SEE TABLE BELOW COLD MALE 1" NPT SUPPLY LINES STUB OUT 1" FROM WALL 12" (305mm)* SEE TABLE BELOW 2" (51mm) 4" (102mm) FINISHED FLOOR Figure 1c * ADJUSTMENTS TO VERTICAL DIMENSIONS FOR VARIOUS RIM HEIGHTS Rim Height Application Adjustment
PAGE 6
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Rough-In Specifications 1" (25) Type A Drain - Supplies through wall - Vent through wall off-drain (mm) 1/2" NPT COLD SUPPLY THROUGH WALL Installation Instructions NOTE: Drain P-Trap & Supplies by Others 1-1/2" NPT DRAIN 2" (51) 36" BOWL (914) 2" (51) 5" R.
PAGE 7
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Step 1: Rough-In Drain & Supplies 1. Rough in supply and drain piping as required for your installation (see pages 5-6 for rough-ins of optional installations). Step 2: Bowl/pedestal mounting and assembly 1. Attach the stainless steel pedestal base to the pedestal using supplied screws and finishing washers.
PAGE 8
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Installation Instructions continued . . . Step 3: Installing drain spud in bowl NOTE: Seal between drain spud and drain hole with plumber’s putty (supplied by installer). 1. Secure drain spud with lock nut and washers as shown in Figure 5. Figure 5 Step 4: Supply Stop Valve,Tubing Connection, and P-trap Installation NOTE: Flush supply lines before making connections. 1.
PAGE 9
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions continued . . . Step 5: Cylindrical Air Valve assembly for A drain and O drain units 1. Install hemmed end (not sharp end) of support tube with gasket onto bowl. 2. Place sprayhead with 3/8" tubing onto support tube as shown in Figure 7 on page 10. Run tubing down through support tube. Make sure spray holes point away from the wall. 3.
PAGE 10
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Installation Instructions continued . . . TOP COVER 107-099 (A) 107-179 (O) TIE ROD PRE-PACK S45-1336 ACTUATOR MODULE ASSEMBLY S65-134 MODULE COVER S04-083 TIE ROD 176-008 COVER TIE ROD PRE-PACK INFRARED MODULE ASSY.
PAGE 11
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions continued . . . Optional Soap Installation Instructions .
PAGE 12
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Installation Instructions continued . . . VALVE AND TUBING CONNECTIONS - AIR METERING VALVE AIR VALVE WITH THERMOSTATIC MIXING VALVE (SHOWN ) S45-2246 AIR VALVE WITH TEMPERED LINE (NOT SHOWN ) S45-2254 NOTE: FLUSH SUPPLY LINES BEFORE MAKING CONNECTIONS. DO NOT APPLY PIPE SEALANT TO COMPRESSION FITTINGS.
PAGE 13
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Vernatherm Adjustment Instructions NOTE: The Vernatherm TMA valve is NOT factory preset. Upon installation, the temperature of this valve must be checked and adjusted to ensure delivery of a safe water temperature. Water in excess of 110°F (43°C) may cause scalding. 1. Check the temperature when approximately 1.
PAGE 14
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Cleaning/Maintenance Instructions for Terreon® Material Description: Terreon® is a NAHB Certified densified solid surface material composed of polyester resin and is resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.
PAGE 15
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Cleaning and Maintenance Instructions for Stainless Steel Material Description: Stainless steel is extremely durable, and maintenance is simple and inexpensive. Proper care, particularly under corrosive conditions, is essential. Always start with the simplest solution and work your way toward the more complicated.
PAGE 16
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Soap Valve — Liquid — S09-007S Parts List 3 Attaching Parts S09-007S Item 1 2 3 4 5 * * * Part No. Description 118-025 110-007 135-001L 125-001BU 119-028 161-014 124-001D 142-002AH Valve Body Packing Nut Spring Washer Plunger Nut Washer Washer - Stainless Steel 1 Qty 4 1 1 1 1 1 1 2 1 5 2 * Not Illustrated This valve delivers a measured amount of soap with each upward stroke.
PAGE 17
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Soap Valve — Powdered — S09-010A Parts List Item Part No. Qty 1 Description 1 160-069 1 Screw, 1/4-20 RD 2 142-002X 1 Washer, 1/4 Split-Lock 3 S62-002 1 Agitator / Slide Assy. 4 192-004 1 Lever - Powdered Soap 2 3 NOTE: Reducer plugs are available for use with fine granulated soap to reduce the flow.
PAGE 18
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Soap Maintenance Tips SOAP RECOMMENDATIONS Quality soap dispensers require good quality soap and periodic maintenance to properly operate. Bradley soap dispensers will provide dependable, consistent operation over the long term when soap with reasonable viscosity and pH levels are used and when a minimal amount of periodic maintenance is performed on the valves.
PAGE 19
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Sprayheads — Standard w/Neoprene Spray Ring Grommet NOTE: Repair kit does not include sprayhead grommet. Order as a separate item. 1 2 4 5 3 9 7 10 6 8 Parts List Sprayhead Assembly S05-054B Item 1 2 3 4 5 6 7 8 9 10 Part No.
PAGE 20
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Actuator Module Components Piston * (119-227A) U-Cup * (125-099) Spring * (135-065) Duckbill Check * (198-010) Screw (160-165) Actuator Body * (118-279) Pushbutton Assembly (S08-324) Straight Tube Connector * (169-890) Nut (110-115) Actuator Bracket (140-743) * Included in Actuator Assembly S65-168 Metering Air Valve Maintenance WATER TUBE CONNECTOR Adjust Air Valve Meter Time NOTE:
PAGE 21
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 AST4 Valve Repair Kits 13 1 14 2 3 8 9 10 4 12 11 5 6 7 AST4 Valve Repair Kits AST 4 Valve Kit S65-260 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Repair Kit (Upper) S65-261 Description Diaphragm Armature Spring AST 4 Valve Upper Body Magnet / Diaghragm Assembly AST 4 Valve Cover AST 4 Valve Clamp Nut AST 4 Valve Timer Assembly O-Ring, #2-012 AST 4 Valve Timer Cover Screw, #8 x 7/8" Comp
PAGE 22
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Metering Air Valve Troubleshooting Problem: Valve will not shut off. Cause: Timing mechanism is clogged. Solution: Clean and inspect timing mechanism: 1. If compressed air is available, blow water and debris from timer cover of timing mechanism. 2. Turn adjusting screw out all the way. Clean and inspect screw and valve body. 3. Turn adjusting screw in to desired cycle time.
PAGE 23
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Thermostatic Mixing Valve Troubleshooting NOTE: Before attempting to troubleshoot the valve or disassemble the components, check for the following conditions: • If stop/check valves are used, make sure that they are fully open. • Make sure that the hot and cold inlet pipes are connected properly, and that there are no crossconnections or leaking stop/check valves.
PAGE 24
Terreon® Deep Bowl 36" Semi-Circular Washfountain with Air Metering Valve TDB3103, WF3203 Installation Instructions Vernatherm™ Thermostatic Mixing Valve (S01-524) Repair Kit S65-259 Item Qty 5 1 Thermostat 7 1 O-Ring 8 1 O-Ring 10 Nut 3/8-24 Hex Jam Description 9 Cap 8 O-Ring 7 O-Ring 6 Stem 5 Thermostat 4 Piston 3 Spring 2 Seal Cup 1 Valve Body Strainer 11 (173-028) Figure 11 Tempered Line Adapter Assembly (S39-685) Option Figure 12 Strainer 173-028 24 2/8/07 Bradley Corporation
PAGE 25
Installation Installation Instalación A D A CO M PL IA NT TDB3103 ® Terreon 36" Semi-circular Deep Bowl Washfountain with Infrared Control ® TDB3103 with Infrared Control Terreon Lavabo fontaine 914 mm (36") à cuvette profonde semi-circulaire avec commande à infrarouge TDB3103 avec commande à infrarouge WF3203 with Infrared Control Modelo TDB3103 con control infrarrojo WF3203 avec commande à infrarouge Modelo WF3203 con control infrarrojo Fuente de lavado semicircular con palangana profunda Te
PAGE 26
TDB3103, WF3203 Installation Table of Contents Pre-Installation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Model TDB3103 Washfountain Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Model WF3203 Washfountain Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Washfountain Rough-Ins . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 27
Installation TDB3103, WF3203 Semi-Circular Washfountain Dimensions Model TDB3103 36" Semi-circular - side view Top view 22-3/4" (577) 14-1/16" (357) Model TDB3103 ADA Compliant 4-3/4" (121) Optional equipment may not comply with all ADA dimensional guidelines 13-1/2" (343) 36" (914) 6" (152) 14" (356) Back view *53-1/4" (1353) 8" (203) *44-7/8" (1140) *41-1/4" (1048) *34" (864) *38" (965) *24-1/2" (622) *30-3/8" (772) 14" (356) 12" (305) 9" *(229) 10" *(254) 7" (178) 5-1/2" (140) Fig
PAGE 28
TDB3103, WF3203 Installation Semi-Circular Washfountain Dimensions Model WF3203 36" Semi-circular - side view Top view 6" (152) Back view Bottom View Figure 1b 4 3-5-08 Bradley Corporation • 215-1332 Rev.
PAGE 29
Installation TDB3103, WF3203 Semi-Circular Washfountain Rough-Ins 2" (51mm) 1" (25mm) 1-1/2" NPT DRAIN FROM THE WALL LOCATION OF ELECTRICAL OUTLET (CHECK LOCAL CODES - OUTLET MAY BE REQUIRED TO BE IN A REMOTE LOCATION) PEDESTAL OPENING AT WALL 9" (229mm) 7" (178mm) HOT 34" (864mm) RIM HEIGHT* SEE TABLE BELOW COLD MALE 1" NPT SUPPLY LINES STUB OUT 1" FROM WALL 12" (305mm)* SEE TABLE BELOW 2" (51mm) 4" (102mm) FINISHED FLOOR Figure 1c * ADJUSTMENTS TO VERTICAL DIMENSIONS FOR VARIOUS RIM HEIGHTS
PAGE 30
TDB3103, WF3203 Installation Rough-In Specifications NOTE: DRAIN P-TRAP & SUPPLIES BY OTHERS Type A Drain - Supplies through wall - Vent through wall off-drain 1" (25) 1/2" NPT COLD SUPPLY THROUGH WALL 1-1/2" NPT DRAIN 2" (51) (mm) 36" BOWL (914) 2" (51) 5" R.
PAGE 31
Installation 1 TDB3103, WF3203 Rough-in drain & supplies NOTE: A ROUGH IN SUPPLY AND DRAIN PIPING AS REQUIRED FOR YOUR INSTALLATION (SEE PAGES 5-6 FOR ROUGH-INS OF OPTIONAL INSTALLATIONS) 2 A location to plug in the 24 VAC transformer is required. Refer to Figure 1c on page 5 for outlet rough-in. Bowl/pedestal mounting and assembly NOTE: A ATTACH THE STAINLESS STEEL PEDESTAL BASE TO THE PEDESTAL USING SUPPLIED SCREWS AND FINISHING WASHERS. FOR WALLMOUNTED MODELS, SEE PAGES 3-4 FOR PEDESTAL HEIGHT.
PAGE 32
TDB3103, WF3203 3 Installation Installing drain spud in bowl NOTE! A SECURE DRAIN SPUD WITH LOCK NUT AND WASHERS AS SHOWN IN FIGURE 5. Seal between drain spud and drain hole with plumber’s putty (supplied by installer). Figure 5 4 Supply Stop Valve connection, and P-trap installation A USING PIPE THREAD SEALANT, THREAD SUPPLIED 1/2" STREET ELBOWS INTO THE 1/2" ANGLE SUPPLY STOPS (SEE FIGURE 9A, PAGE 12) B AGAIN USING PIPE THREAD SEALANT, THREAD SUPPLY STOPS ONTO STUB-OUTS.
PAGE 33
Installation 5 A B TDB3103, WF3203 Adaptive infrared assembly for A drain and O drain units INSTALL HEMMED END (NOT SHARP END) OF SUPPORT TUBE WITH GASKET ONTO BOWL (SEE FIGURE 7 ON PAGE 10). PLACE SPRAYHEAD WITH 3/8" TUBING ONTO SUPPORT TUBE AS SHOWN IN FIGURE 7 ON PAGE 10. RUN TUBING DOWN THROUGH SUPPORT TUBE. MAKE SURE SPRAY HOLES POINT AWAY FROM THE WALL. C PLACE UPPER TIE BAR (NOTCHED AT CORNERS OF BOTH ENDS) ON TOP OF SPRAYHEAD PARALLEL TO WALL.
PAGE 34
TDB3103, WF3203 Installation Installation Instructions continued . . . TOP COVER 107-099 (A) 107-179 (O) TIE ROD PRE-PACK S45-1336 INFRARED MODULE ASSY. I.R.
PAGE 35
Installation TDB3103, WF3203 Installation Instructions continued . . . Optional Soap Installation Instructions UNIT WITH “A” DRAIN AND I.R. MODULE SHOWN, ALSO AVAILABLE WITH “O” DRAIN TOP COVER RESTRAINING BRACKET 140-128 SOAP DISPENSER 8-5/8" TIE ROD 176-010 SPACER COUPLING NUT AND SET SCREW MODULE COVER 4-1/4" TIE ROD 176-118 COUPLING NUT AND SET SCREW I.R. MODULE ASSEMBLY 18-1/8" TIE ROD 176-008 TIE BAR SUPPORT TUBE SPRAYHEAD Figure 8 Bradley Corporation • 215-1332 Rev.
PAGE 36
TDB3103, WF3203 Installation Installation Instructions continued . . . TIE ROD 3/8" TUBING FROM SPRAYHEAD TIE ROD NUT 110-064 I.R. VALVE WITH THERMOSTATIC MIXING VALVE (SHOWN) S45-2233 (DO NOT APPLY PIPE SEALANT TO COMPRESSION FITTINGS) VOLUME CONTROL FLEXIBLE HOSE 269-1735 I.R.
PAGE 37
Installation TDB3103, WF3203 Vernatherm Ajustment Instructions NOTE: The Vernatherm TMA valve is NOT factory preset. Upon installation, the temperature of this valve must be checked and adjusted to ensure delivery of a safe water temperature. Water in excess of 110°F (43°C) may cause scalding. A CHECK THE TEMPERATURE AND ADJUST IF NECESSARY (THE RANGE OF THE VALVE IS 95°F–115°F (35°C–43°C). TO ADJUST THE TEMPERATURE, FOLLOW THE PROCEDURE BELOW: • LOOSEN TEMPERATURE LOCKING NUT WITH WRENCH.
PAGE 38
TDB3103, WF3203 Installation Cleaning/Maintenance Instructions for Terreon® Material Description: Terreon® is a NAHB Certified densified solid surface material composed of polyester resin and is resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives. Routine Cleaning: Clean daily or as often as conditions require using a standard commercial or household cleaner such as Formula 409® or Windex®.
PAGE 39
Installation TDB3103, WF3203 Cleaning and Maintenance Instructions for Stainless Steel Material Description: Stainless steel is extremely durable, and maintenance is simple and inexpensive. Proper care, particularly under corrosive conditions, is essential. Always start with the simplest solution and work your way toward the more complicated. Routine Cleaning: Daily or as often as needed use a solution of warm water and soap, detergent, or ammonia.
PAGE 40
TDB3103, WF3203 Installation Soap Valve — Liquid — S09-007S Parts List 3 Attaching Parts S09-007S Item 1 2 3 4 5 * * * Part No. Description 118-025 110-007 135-001L 125-001BU 119-028 161-014 124-001D 142-002AH Valve Body Packing Nut Spring Washer Plunger Nut Washer Washer - Stainless Steel 1 Qty 4 1 1 1 1 1 1 2 1 5 2 * Not Illustrated This valve delivers a measured amount of soap with each upward stroke.
PAGE 41
Installation TDB3103, WF3203 Soap Valve — Powdered — S09-010A Parts List Item Part No. Qty Description 1 160-069 1 Screw, 1/4-20 RD 2 142-002X 1 Washer, 1/4 Split-Lock 3 S62-002 1 Agitator / Slide Assy. 4 192-004 1 Lever - Powdered Soap 1 2 3 NOTE: Reducer plugs are available for use with fine granulated soap to reduce the flow. NOTE: Valves can be changed from powdered to liquid by plugging the innermost, or “bearing” hole with rubber plug, part number 125-001AK.
PAGE 42
TDB3103, WF3203 Installation Soap Maintenance Tips SOAP RECOMMENDATIONS Quality soap dispensers require good quality soap and periodic maintenance to properly operate. Bradley soap dispensers will provide dependable, consistent operation over the long term when soap with reasonable viscosity and pH levels are used and when a minimal amount of periodic maintenance is performed on the valves. Soap thickness is determined by a measurement called viscosity.
PAGE 43
Installation TDB3103, WF3203 Sprayheads — Standard w/Neoprene Spray Ring Grommet NOTE: Repair kit does not include sprayhead grommet. Order as a separate item. 1 2 4 5 3 9 7 10 6 8 Parts List Sprayhead Assembly S05-054B Item 1 2 3 4 5 6 7 8 9 10 Part No.
PAGE 44
TDB3103, WF3203 Installation I.R. Module Assembly Components S50-367 WINDOW 269-1351 IR Actuator Troubleshooting Adaptive IR There is a LED diagnostic light built into the small black box housing the circuitry for the sensor. Below is a list of what the signals from the LED mean. Use this list to troubleshoot the sensor. 1. LED not illuminated — no power is getting to the sensor. Check for power at the 110 VAC wall outlet and from the wires from the 24 VAC transformer.
PAGE 45
Installation TDB3103, WF3203 Solenoid Valve Troubleshooting CAUTION: Problem: Cause: Solution: Turn off water supplies to unit before troubleshooting. An individual operating station fails to shut off and drips. There is debris trapped between the diaphragm and the valve seat. Remove debris between diaphragm and the valve seat. 1. Remove the three #8 Phillips-head screws that hold the solenoid valve assembly together. Be careful not to lose the armature or spring (see Figure 11 on page 22). 2.
PAGE 46
TDB3103, WF3203 Installation Solenoid Valve S07-069 (closed body) REF. 1 2 3 4 5 6 7 8 9 8 7 8 QTY. 1 1 1 1 1 1 1 3 1 PART NO. 118-308 269-983 269-577 269-578 269-1729 269-1730 269-579 160-447 125-165 DESCRIPTION VALVE BODY, 5/16" CLOSED DIAPHRAGM ARMATURE SPRING ARMATURE HOUSING CLAMP, ARMATURE HOUSING COIL, SOLENOID VALVE SCREW, #8 X 5/8 O-RING, #2-013 6 5 4 3 2 1 9 Figure 11 22 3-5-08 Bradley Corporation • 215-1332 Rev.
PAGE 47
Installation TDB3103, WF3203 Thermostatic Mixing Valve Troubleshooting NOTE: Before attempting to troubleshoot the valve or disassemble the components, check for the following conditions: • If stop/check valves are used, make sure that they are fully open. • Make sure that the hot and cold inlet pipes are connected properly, and that there are no crossconnections or leaking stop/check valves. • Check the hot water heater output to make sure that it is at least 20° F above the set temperature.
PAGE 48
TDB3103, WF3203 Installation Vernatherm™ thermostatic mixing valve (S01-524) Repair Kit S65-259 Item Qty Description 5 1 Thermostat 7 1 O-Ring 8 1 O-Ring 10 Nut 3/8-24 Hex Jam 9 Cap 8 O-Ring 7 O-Ring 6 Stem 5 Thermostat 4 Piston 3 Spring 2 Seal Cup 1 Valve Body Strainer 11 (173-028) Figure 12 Tempered Line Adapter Assembly (S39-685) Option Figure 13 24 Strainer 173-028 3-5-08 Bradley Corporation • 215-1332 Rev.
PAGE 49
Installation TDB3103, WF3203 Sommaire Informations sur la pré-installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Dimensions du lavabo fontaine Modèle TDB3103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Dimensions du lavabo fontaine Modèle WF3203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 50
TDB3103, WF3203 Installation Dimensions du lavabo fontaine semi-circulaire Modèle TDB3103 Model TDB3103 914 mm (36") Semi-circulaire - vue latérale 36" Semi-circular - side view VueTop de view dessus 22-3/4" 577 mm (577) (22-3/4") Modèle TDB3103 Model TDB3103 Conforme ADA ADA Compliant 357 mm 14-1/16" (14-1/16") (357) 121 mm 4-3/4" (4-3/4") (121) L’équipement optionnel risque de ne pas êtreequipment conforme may à toutes les Optional not comply directives dimensionnelles ADA with all ADA dimensional
PAGE 51
Installation TDB3103, WF3203 Dimensions du lavabo fontaine semi-circulaire 577 mm (22-3/4") Modèle WF3203 914 mm (36") Semi-circulaire - vue latérale Vue de dessus 121 mm (4-3/4") 343 mm (13-1/2") 914 mm (36") 1526"mm (6") (152) 356 mm (14") 1332 mm (52-7/16") Vue arrière 203 mm (8") 1131 mm (44-1/2") 1041 mm (41") 889 mm (35") 1003 mm (39-1/2") 622 mm (24-1/2") 305 mm (12") 356 mm (14") 254 mm (10") 229 mm (9") 178 mm (7") 140 mm (5-1/2") Vue de dessous 140 mm (5-1/2") Figure 1b Bradle
PAGE 52
TDB3103, WF3203 Installation Mises en place des tuyauteries du lavabo fontaine semi-circulaire 51 mm (2") 25 mm (1") DRAIN 1-1/2" NPT DU MUR EMPLACEMENT DE LA PRISE ÉLECTRIQUE (VÉRIFIER CODES LOCAUX IL FAUT PEUT-ETRE QUE LA PRISE SE TROUVE DANS UN ENDROIT ÉLOIGNÉ) OUVERTURE POUR SOCLE AU NIVEAU DU MUR 229 mm (9") 178 mm (7") EAU CHAUDE EAU FROIDE 864 mm (34") HAUTEUR DE BORD* VOIR TABLE CI-DESSOUS CONDUITES D’ALIMENTATION MALES 1" NPT TUBULURE SORTIE DE 1" DU MUR 305 mm (12")* VOIR TABLE CI-DESSOU
PAGE 53
Installation TDB3103, WF3203 Spécifications de mise en place des tuyauteries Drain de type A - Alimentations dans le mur - Aération par le mur hors du drain ALIMENTATION EAU FROIDE 1/2" 1/2" NPT COLD SUPPLY THROUGH WALL 251" mm (1") (25) REMARQUE : SIPHON P DE DRAIN ET FOURNITURES PAR AUTRUI NPT DANS LE MUR DRAIN 1-1/2" NPT1-1/2" DRAIN NPT 2" 51 mm (2") (51) CUVETTE 36" BOWL 914 mm (36") (914) ACCÈS INFÉRIEUR ARRIÈRE 5" R.
PAGE 54
TDB3103, WF3203 1 A Installation Mise en place des tuyauteries de drain et d’alimentation REMARQUE : METTRE EN PLACE DES CANALISATIONS D’ALIMENTATION ET DE DRAIN TEL QUE REQUIS POUR L’INSTALLATION (VOIR PAGES 28 À 29 POUR MISES EN PLACE DES TUYAUTERIES DES INSTALLATIONS EN OPTION). 2 Un emplacement pour brancher le transformateur 24 V c.a. est nécessaire. Consulter la Figure 1c en page 28 pour mises en place des tuyauteries de sortie.
PAGE 55
Installation 3 A TDB3103, WF3203 Installation de l’ergot de drain dans la cuvette REMARQUE ! FIXER L’ERGOT DE DRAIN À L’AIDE DU CONTRE-ÉCROU ET DES RONDELLES COMME L’INDIQUE LA FIGURE 5. Appliquer du mastic (fourni par l’installateur) entre l’ergot de drain et l’orifice de drain.
PAGE 56
TDB3103, WF3203 5 A B Installation Ensemble infrarouge Adaptive pour unités à drain A et à drain O INSTALLER L’EXTRÉMITÉ OURLÉE (NON TRANCHANTE) DU TUBE-SUPPORT AVEC LE JOINT DANS LA CUVETTE (VOIR FIGURE 7 EN PAGE 33). PLACER LE BEC DIFFUSEUR AVEC LA TUBULURE DE 3/8" SUR LE TUBE-SUPPORT COMME L’INDIQUE LA FIGURE 7 EN PAGE 33. FAIRE PASSER LA TUBULURE DANS LE TUBE-SUPPORT. S’ASSURER QUE LES ORIFICES DE PULVÉRISATION SONT DIRIGÉS DANS LE SENS OPPOSÉ DU MUR.
PAGE 57
Installation TDB3103, WF3203 Instructions relatives à l’installation suite . . . PRÉ-CONDITIONNEMENT TRINGLERIE S45-1336 COUVERCLE DE MODULE S04-083 TRINGLERIE 176-008 COUVERCLE SUPÉRIEUR 107-099 (A) 107-179 (O) PRÉ-CONDITIONNEMENT TRINGLERIE ENSEMBLE MODULE I.R.
PAGE 58
TDB3103, WF3203 Installation Instructions relatives à l’installation suite . . . Instructions sur l’installation de savon en option UNITÉ AVEC DRAIN « A » ET MODULE I.R. ILLUSTRÉE, ÉGALEMENT DISPONIBLE AVEC DRAIN « O » COUVERCLE SUPÉRIEUR CONSOLE DE RETENUE 140-128 DISTRIBUTEUR DE SAVON TRINGLERIE DE 8-5/8" 176-010 ENTRETOISE RACCORD-ÉCROU ET VIS CALANTE COUVERCLE DE MODULE TRINGLERIE DE 4-1/4" 176-118 RACCORD-ÉCROU ET VIS CALANTE ENSEMBLE MODULE I.R.
PAGE 59
Installation TDB3103, WF3203 Instructions relatives à l’installation suite . . . TRINGLERIE TIE ROD TUBULURE DE 3/8"FROM DU BEC DIFFUSEUR 3/8" TUBING SPRAYHEAD TIE RODDE NUT 110-064 110-064 ÉCROU TRINGLERIE ROBINET AVECWITH ROBINET MÉLANGEUR I.R.I.R.
PAGE 60
TDB3103, WF3203 Installation Instructions de réglage Vernatherm REMARQUE : Le robinet Vernatherm TMA N’est PAS pré-réglé en usine. Lors de l’installation, la température de ce robinet doit être vérifiée et ajustée pour assurer une température d’eau sans danger. Une température d’eau supérieure à 43 °C (110 °F) risque de provoquer un échaudage. A VÉRIFIER LA TEMPÉRATURE ET AJUSTER LE CAS ÉCHÉANT (LA PLAGE DU ROBINET VA DE 35 °C À 43 °C (95 °F À 115 °F).
PAGE 61
Installation TDB3103, WF3203 Instructions de nettoyage/d’entretien pour Terreon® Description du matériau : Terreon® est un matériau de surface massif densifié certifié NAHB composé de résine de polyester et résistant aux produits chimiques, aux taches, aux brûlures et à l’impact. Les dommages de surface peuvent être facilement réparés à l’aide de produits nettoyants ordinaires ou d’abrasifs à grains fins.
PAGE 62
TDB3103, WF3203 Installation Instructions concernant le nettoyage et l’entretien de l’acier inoxydable Description du matériau : L’acier inoxydable est extrêmement durable, et son entretien est simple et peu onéreux. Il est essentiel de l’entretenir correctement, particulièrement dans des conditions corrosives. Toujours commencer par la solution la plus simple et continuer par une solution plus compliquée.
PAGE 63
Installation TDB3103, WF3203 Bouton-poussoir de savon — liquide — S09-007S Nomenclature 3 Pièces de fixation S09-007S Repère 1 Référence 118-025 Désignation Corps de bouton-poussoir 2 110-007 Écrou de presse-garniture 1 3 135-001L Ressort 1 4 125-001BU Rondelle 1 5 119-028 Piston 1 * 161-014 Écrou 1 * 124-001D Rondelle 2 * 142-002AH Rondelle - Acier inoxydable 1 1 Qté 1 4 5 2 * Non illustré Ce bouton-poussoir distribue une quantité dosée de savon avec chaque mouvemen
PAGE 64
TDB3103, WF3203 Installation Bouton-poussoir de savon — en poudre — S09-010A Nomenclature Repère Référence Qté Désignation 1 160-069 1 Vis, 1/4-20 RD 2 142-002X 1 Rondelle, 1/4 Split-Lock 3 S62-002 1 Ensemble agitateur/coulisse 4 192-004 1 Levier - Savon en poudre 1 2 3 REMARQUE : Des bouchons réducteurs sont disponibles pour utiliser avec du savon granulé fin pour diminuer le débit.
PAGE 65
Installation TDB3103, WF3203 Conseils d’entretien pour le savon RECOMMANDATIONS DE SAVON Les distributeurs de savon de qualité nécessitent du savon de bonne qualité et un entretien périodique pour fonctionner correctement. Les distributeurs de savon Bradley fonctionnent de manière fiable et constante à long terme à condition d’utiliser un savon ayant une viscosité et des niveaux de pH raisonnables et d’effectuer un minimum d’entretien périodique sur les boutons-poussoirs.
PAGE 66
TDB3103, WF3203 Installation Becs diffuseurs — Standard avec anneau de pulvérisation en néoprène REMARQUE : Le kit de réparation n’inclut pas l’anneau du bec. Commander en article séparé.
PAGE 67
Installation TDB3103, WF3203 Composants de l’ensemble de module I.R. S50-367 FENÊTRE 269-1351 Actionneur IR Dépannage IR Adaptive Il y a un voyant DEL de diagnostic incorporé dans le petit boîtier noir abritant les circuits du détecteur. En dessous se trouve une liste des significations des signaux de la DEL. Utiliser cette liste pour dépanner le détecteur. 1. DEL non allumée — aucune alimentation n’arrive au détecteur. Vérifier l’alimentation au niveau de la prise murale de 110 V c.a.
PAGE 68
TDB3103, WF3203 Installation Guide de dépannage du robinet électromagnétique ATTENTION : Couper l’alimentation en eau à l’unité avant d’effectuer toute réparation. Problème : Cause : Solution : Une station opérationnelle individuelle ne se ferme pas et goutte. Il y a des débris piégés entre la membrane et le siège du bouton-poussoir. Retirer les débris entre la membrane et le siège du bouton-poussoir. 1.
PAGE 69
Installation TDB3103, WF3203 Robinet électromagnétique S07-069 (corps fermé) REPÈRE QTÉ RÉFÉRENCE REF. 11 22 33 4 4 5 65 76 87 98 8 7 8 9 QTY. 11 11 11 1 1 1 11 11 31 13 1 PART NO.
PAGE 70
TDB3103, WF3203 Installation Dépannage du robinet mélangeur thermostatique REMARQUE : Avant d’essayer de dépanner le robinet ou de démonter les composants, vérifier les conditions suivantes : • Si la robinetterie arrêt/non-retour est utilisée, s’assurer qu’elle soit complètement ouverte. • S’assurer que les canalisations d’arrivée chaude et froide sont correctement raccordées et qu’il n’existe ni de raccordements croisés ni de fuite de robinetterie arrêt/non-retour.
PAGE 71
Installation TDB3103, WF3203 Robinet mélangeur thermostatique Vernatherm™ (S01-524) Kit de réparation S65-259 Pièce Qté 5 1 Thermostat 7 1 Joint torique 8 1 Joint torique Figure 12 10 Description Contre-écrou 3/8-24 hexagonal 9 Capuchon 8 Joint torique 7 Joint torique 6 Tige 5 Thermostat 4 Piston 3 Ressort 2 Joint 1 Corps de robinet Crépine 11 (173-028) Ensemble d’adaptateur de conduite trempée (S39-685) en option Figure 13 Crépine 173-028 Bradley Corporation • 215-1332
PAGE 72
TDB3103, WF3203 Installation Índice Información previa a la instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Dimensiones de la fuente de lavado modelo TDB3103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Dimensiones de la fuente de lavado modelo TDB3203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Especificaciones de instalación de tuberías empotradas de la fuente de lavado . . . . . . . . . . .
PAGE 73
Installation TDB3103, WF3203 Dimensiones de la fuente de lavado semicircular Modelo TDB3103 Model TDB3103 Vista lateral de semicircular 36" Semi-circular - side view de 914 mm (36") 22-3/4" 577 mm (577) (22-3/4") 357 mm 14-1/16" (14-1/16") (357) ModeloTDB3103 TDB3103 Model Cumple las normas ADA con Compliant de ADA Optional equipment may not comply Es posible que el equipo opcional with all ADA dimensional guidelines no cumpla todas las directrices de dimensiones de ADA VistaTop en planta view 121 mm
PAGE 74
TDB3103, WF3203 Installation Dimensiones de la fuente de lavado semicircular Modelo WF3203 Vista lateral de semicircular de 914 mm (36") 577 mm (22-3/4") Vista en planta 121 mm (4-3/4") 343 mm (13-1/2") 914 mm (36") 1526"mm (6") (152) 356 mm (14") 1332 mm (52-7/16") Vista posterior 203 mm (8") 1131 mm (44-1/2") 1041 mm (41") 889 mm (35") 1003 mm (39-1/2") 622 mm (24-1/2") 356 mm (14") 305 mm (12") 229 mm (9") 254 mm (10") 140 mm (5-1/2") Vista de abajo arriba 254 mm (10") 140 mm (5-1/2")
PAGE 75
Installation TDB3103, WF3203 Especificaciones de instalación de tuberías empotradas de fuentes de lavado semicirculares 51 mm (2") 25 mm (1") DESAGÜE DE 1-1/2" NPT DESDE LA PARED UBICACIÓN DEL TOMACORRIENTE ELÉCTRICO (VERIFIQUE LOS CÓDIGOS LOCALES, ES POSIBLE QUE SEA NECESARIO QUE EL TOMACORRIENTE ESTÉ EN UNA UBICACIÓN REMOTA) ABERTURA DEL PEDESTAL EN LA PARED 229 mm (9") 178 mm (7") CALIENTE ALTURA* DEL BORDE 864 mm (34") CONSULTE LA TABLA QUE SE ENCUENTRA A CONTINUACIÓN FRÍO TUBERÍAS DE SUMINISTR
PAGE 76
TDB3103, WF3203 Installation Especificaciones técnicas para instalación de tuberías empotradas NOTA: DESAGÜE PARA SIFÓN TIPO P Y OTROS SUMINISTROS Desagüe tipo A - Suministros a través de la pared - Ventilaciones a través del desagüe fuera de la pared SUMINISTRO DE AGUA FRÍA DE 1/2" NPT A TRAVÉS DE LA PARED 251" mm (1") (25) 1/2" NPT COLD SUPPLY THROUGH WALL 1-1/2" NPT DRAIN DESAGÜE NPT 51 mm 2" (2") (51) DE 1-1/2" 36" BOWL PALANGANA DE 914 mm (36") (914) ACCESO INFERIOR DERECHO 5"DE R.
PAGE 77
Installation TDB3103, WF3203 1 Desagüe y suministros empotrados NOTA: A TUBERÍAS DE SUMINISTRO Y DESAGÜE EMPOTRADAS NECESARIAS PARA LA INSTALACIÓN (CONSULTE LAS PÁGINAS 51 Y 52 PARA VER LAS ESPECIFICACIONES DE INSTALACIÓN OPCIONALES DE TUBERÍAS EMPOTRADAS). 2 Se requiere una ubicación para enchufar el transformador de 24 V CA. Consulte la Figura 1c en la página 51 para el tomacorriente empotrado.
PAGE 78
TDB3103, WF3203 3 A Installation Instalación del embudo de desagüe en la palangana ¡NOTA! Selle entre el embudo y el orificio de desagüe con masilla para tuberías (proporcionada por el instalador). FIJE EL EMBUDO DE DESAGÜE CON LA CONTRATUERCA Y LAS ARANDELAS COMO SE MUESTRA EN LA FIGURA 5.
PAGE 79
Installation 5 A B C D TDB3103, WF3203 Conjunto del dispositivo infrarrojo Adaptive para unidades de desagüe tipo A y tipo O INSTALE EN LA PALANGANA, EL EXTREMO GUARNECIDO (NO EL EXTREMO AFILADO) DEL TUBO DE SOPORTE CON LA EMPAQUETADURA (CONSULTE LA FIGURA 7 EN LA PÁGINA 56). UBIQUE LA BOQUILLA ROCIADORA CON LA TUBERÍA DE 3/8" EN EL TUBO DE SOPORTE COMO SE MUESTRA EN LA FIGURA 7 EN LA PÁGINA 56. TIENDA LA TUBERÍA HACIA ABAJO A TRAVÉS DEL TUBO DE SOPORTE.
PAGE 80
TDB3103, WF3203 Installation Instrucciones de instalación continuación . . .
PAGE 81
Installation TDB3103, WF3203 Instrucciones de instalación continuación . . .
PAGE 82
TDB3103, WF3203 Installation Instrucciones de instalación continuación . . . TIE RODDE CONEXIÓN VARILLA TUBERÍA 3/8" DESDE 3/8" TUBING FROMDE SPRAYHEAD TUERCA LA VARILLA TIE RODDE NUT 110-064DE LA BOQUILLA ROCIADORA CONEXIÓN 110-064 VÁLVULA DE IR CON VÁLVULA I.R.
PAGE 83
Installation TDB3103, WF3203 Instrucciones de ajuste de Vernatherm NOTA: La válvula TMA Vernatherm NO viene ajustada de fábrica. En la instalación, debe verificarse y ajustarse la temperatura de esta válvula para garantizar el suministro de una temperatura segura del agua. El agua que tenga una temperatura mayor que 43° C (110° F) puede provocar escaldado.
PAGE 84
TDB3103, WF3203 Installation Instrucciones de limpieza/mantenimiento de Terreon® Descripción del material: Terreon® es un material de superficie sólida densificada con certificación NAHB compuesto de resina poliéster que es resistente a los productos químicos, las manchas, las quemaduras y los golpes. Los daños a las superficies se pueden reparar fácilmente con productos de limpieza de uso diario o abrasivos de polvo fino.
PAGE 85
Installation TDB3103, WF3203 Instrucciones de limpieza y mantenimiento del acero inoxidable Descripción del material: El acero inoxidable es extremadamente duradero y su mantenimiento es sencillo y económico. El cuidado adecuado es fundamental, en especial bajo condiciones corrosivas. Siempre comience con la solución más sencilla y trabaje hacia las más complicadas. Limpieza de rutina: A diario o con la frecuencia que sea necesario, use una solución de agua tibia, jabón, detergente o amoníaco.
PAGE 86
TDB3103, WF3203 Installation Válvula para jabón — líquido — S09-007S Lista de piezas 3 Piezas de conexión S09-007S Artículo 1 Nº de pieza 118-025 Descripción Cuerpo de la válvula 2 110-007 Tuerca de presión 1 3 135-001L Resorte 1 4 125-001BU Arandela 1 5 119-028 Émbolo 1 * 161-014 Tuerca 1 * 124-001D Arandela 2 * 142-002A Arandela de acero inoxidable 1 1 Cant. 1 4 5 2 * No se muestra Esta válvula entrega una cantidad medida de jabón con cada golpe hacia arriba.
PAGE 87
Installation TDB3103, WF3203 Válvula de jabón — en polvo — S09-010A Lista de piezas Articulo Nº de pieza 1 Cant. Descripción 1 160-069 1 Tornillo, 1/4-20 RD 2 142-002X 1 Arandela, 1/4 cierre dividido 3 S62-002 1 Conjunto de agitador/deslizante 4 192-004 1 Palanca de jabón en polvo 2 3 NOTA: Contamos con tapones reductores para usarlos con jabón granulado fino para reducir el flujo.
PAGE 88
TDB3103, WF3203 Installation Consejos para el mantenimiento del jabón RECOMENDACIONES SOBRE EL JABÓN Los dispensadores de jabón de calidad requieren jabón de buena calidad y mantenimiento periódico para funcionar en forma apropiada. Los dispensadores de jabón de Bradley proporcionarán un funcionamiento confiable y constante a largo plazo si se usa jabón con niveles de viscosidad y de pH razonables y si se realiza una cantidad mínima de mantenimiento periódico en las válvulas.
PAGE 89
Installation TDB3103, WF3203 Boquillas rociadoras — estándares con arandelas aislantes de anillo con rociador de neopreno NOTA: El equipo de reparación no incluye arandela aislante de boquilla rociadora. Pídala como un artículo separado. 1 2 4 5 3 9 7 10 6 8 Lista de piezas Conjunto de boquilla rociadora S05-054B Artículo 1 Equipo de reparación S45-051 Cant.
PAGE 90
TDB3103, WF3203 Installation Componentes del conjunto del módulo IR S50-367 VENTANA 269-1351 Actuador IR Localización de fallas del dispositivo IR Adaptive Hay una luz de diagnóstico con LED incorporado en la pequeña caja negra que aloja los circuitos del sensor. A continuación hay una lista de lo que significan las señales del LED. Use esta lista para localizar las fallas del sensor. 1. No se ilumina el LED — No está llegando energía al sensor.
PAGE 91
Installation TDB3103, WF3203 Localización de fallas de la válvula de solenoide PRECAUCIÓN: Cierre los suministros de agua hacia la unidad antes de localizar las fallas. Problema: Una estación de funcionamiento individual no se corta y gotea. Causa: Hay desechos atrapados entre el diafragma y el asiento de la válvula. Solución: Saque los desechos entre el diafragma y el asiento de la válvula. 1. Saque los tres tornillos de cabeza Nº 8 de Phillips que sujetan el conjunto de la válvula solenoide.
PAGE 92
TDB3103, WF3203 Installation Válvula de solenoide S07-069 (cuerpo cerrado) REF. REF. 11 2 33 4 4 5 65 76 8 97 8 7 8 CANT. Nº DE PIEZA QTY. 11 1 11 1 1 1 11 11 3 11 PART NO.
PAGE 93
Installation TDB3103, WF3203 Localización de fallas de la válvula mezcladora termostática NOTA: Antes de intentar de localizar la falla de la válvula o desarmar los componentes, verifique las siguientes condiciones: • Si se usan las válvulas de cierre/retención, asegúrese de que estén totalmente abiertas. • Asegúrese de que las tuberías de entrada de agua caliente y fría estén conectadas en forma apropiada y de que no haya conexiones cruzadas o fuga en las válvulas de cierre/retención.
PAGE 94
TDB3103, WF3203 Installation Válvula mezcladora termostática Vernatherm™ (S01-524) Equipo de reparación S65-259 Art. Cant.
PAGE 95
Installation Instructions A D A CO M TDB3103 Terreon® 36" Semi-Circular Deep Bowl Washfountain with TouchTime® Control PL IA NT WF3203 Terreon® Extra Height 36" SemiCircular Classic Washfountain with 9" Deep Bowl and TouchTime® Control TDB3103 Table of Contents Pre-Installation Information . . . . . . . . . . . . . . . . . 2 Model TDB3103 Washfountain Dimensions . . . . 3 Model WF3203 Washfountain Dimensions . . . . . 4 Washfountain Rough-Ins . . . . . . . . . . . . . . . . . .
PAGE 96
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Pre-Installation Information IMPORTANT: Read this entire installation manual to ensure proper installation. IMPORTANT: Flush all the water supply lines before making connections. TouchTime® and solenoid valve Each TouchTime pushbutton activates a flow of water.
PAGE 97
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Installation Instructions Semi-Circular Washfountain Dimensions Model TDB3103 36" Semi-circular - side view Top view 22-3/4" (577) 14-1/16" (357) Model TDB3103 ADA Compliant Optional equipment may not comply with all ADA dimensional guidelines 4-3/4" (121) 13-1/2" (343) 36" (914) 6" (152) 14" (356) Back view *53-1/4" (1353) 8" (203) *44-7/8" (1140) *41-1/4" (1048) *34" (864) *38" (965) *24-1/2" (622) *3
PAGE 98
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Semi-Circular Washfountain Dimensions Model WF3203 36" Semi-circular - side view Top view 6" (152) Back view Bottom View Figure 1b 4 2/12/07 Bradley Corporation • 215-1579 Rev.
PAGE 99
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Installation Instructions Semi-Circular Washfountain Rough-Ins 2" (51mm) 1" (25mm) 1-1/2" NPT DRAIN FROM THE WALL LOCATION OF ELECTRICAL OUTLET (CHECK LOCAL CODES - OUTLET MAY BE REQUIRED TO BE IN A REMOTE LOCATION) PEDESTAL OPENING AT WALL 9" (229mm) 7" (178mm) HOT 34" (864mm) RIM HEIGHT* SEE TABLE BELOW COLD MALE 1" NPT SUPPLY LINES STUB OUT 1" FROM WALL 12" (305mm)* SEE TABLE BELOW 2" (51mm) 4" (102mm)
PAGE 100
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Rough-In Specifications 1" (25) Type A Drain - Supplies through wall - Vent through wall off-drain (mm) 1/2" NPT COLD SUPPLY THROUGH WALL NOTE: Drain P-Trap & Supplies by Others 1-1/2" NPT DRAIN 2" (51) 36" BOWL (914) 2" (51) 5" R.
PAGE 101
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Installation Instructions Step 1: Rough-In Drain & Supplies 1. Rough in supply and drain piping as required for your installation (see pages 5-6 for rough-ins of optional installations). Step 2: Bowl/pedestal mounting and assembly 1. Attach the stainless steel pedestal base to the pedestal using supplied screws and finishing washers.
PAGE 102
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Installation Instructions continued . . . Step 3: Installing drain spud in bowl NOTE: Seal between drain spud and drain hole with plumber’s putty (supplied by installer). 1. Secure drain spud with lock nut and washers as shown in Figure 5. Figure 5 Step 4: Supply Stop Valve,Tubing Connection, and P-trap Installation NOTE: Flush supply lines before making connections. 1.
PAGE 103
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Installation Instructions continued . . . Step 5: TouchTime® assembly for A drain and O drain units 1. Install hemmed end (not sharp end) of support tube with gasket onto bowl. 2. Place sprayhead with 3/8" tubing onto support tube as shown in Figure 7 on page 10. Run tubing down through support tube. Make sure spray holes point away from the wall. 3.
PAGE 104
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Installation Instructions continued . . . TOP COVER 107-099 (A) 107-179 (O) TIE ROD PRE-PACK S45-1336 ACTUATOR MODULE ASSEMBLY S83-180 MODULE COVER S04-083 TIE ROD 176-008 COVER TIE ROD PRE-PACK TOUCHTIME MODULE ASSY.
PAGE 105
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Installation Instructions continued . . . Optional Soap Installation Instructions .
PAGE 106
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Touch Time Installation Instructions continued . . . Step 6: Valve and Electrical Connections for Touch Time NOTE: Touch Time switch has four wires. 1. Connect the two transformer wires, and the two wires from the solenoid valve to the four wires from the the Touch Time switch. See Figure 10. 2. Plug the 24 VAC Class II transformer into the 110 VAC GFI outlet. 3. Turn supplies on.
PAGE 107
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Vernatherm Adjustment Instructions NOTE: The Vernatherm TMA valve is NOT factory preset. Upon installation, the temperature of this valve must be checked and adjusted to ensure delivery of a safe water temperature. Water in excess of 110°F (43°C) may cause scalding. 7. Check the temperature when approximately 1.
PAGE 108
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions TouchTime® Toubleshooting IMPORTANT: Make sure there is electrical power going to the transformer and there are 24 volts coming from the transformer. CAUTION: Be sure to turn off electrical and water supplies as instructed during troubleshooting. If the Touch Time™ push button unit does not function properly 1. Make sure the water supply and the 24 VAC power are both turned on.
PAGE 109
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Cleaning/Maintenance Instructions for Terreon® Material Description: Terreon® is a NAHB Certified densified solid surface material composed of polyester resin and is resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.
PAGE 110
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Cleaning and Maintenance Instructions for Stainless Steel Material Description: Stainless steel is extremely durable, and maintenance is simple and inexpensive. Proper care, particularly under corrosive conditions, is essential. Always start with the simplest solution and work your way toward the more complicated.
PAGE 111
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Soap Valve — Liquid — S09-007S Parts List 3 Attaching Parts S09-007S Item 1 2 3 4 5 * * * Part No. Description 118-025 110-007 135-001L 125-001BU 119-028 161-014 124-001D 142-002AH Valve Body Packing Nut Spring Washer Plunger Nut Washer Washer - Stainless Steel 1 Qty 4 1 1 1 1 1 1 2 1 5 2 * Not Illustrated This valve delivers a measured amount of soap with each upward stroke.
PAGE 112
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Soap Valve — Powdered — S09-010A Parts List Item Part No. Qty Description 1 160-069 1 Screw, 1/4-20 RD 2 142-002X 1 Washer, 1/4 Split-Lock 3 S62-002 1 Agitator / Slide Assy. 4 192-004 1 Lever - Powdered Soap 1 2 3 NOTE: Reducer plugs are available for use with fine granulated soap to reduce the flow.
PAGE 113
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Soap Maintenance Tips SOAP RECOMMENDATIONS Quality soap dispensers require good quality soap and periodic maintenance to properly operate. Bradley soap dispensers will provide dependable, consistent operation over the long term when soap with reasonable viscosity and pH levels are used and when a minimal amount of periodic maintenance is performed on the valves.
PAGE 114
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Sprayheads — Standard w/Neoprene Spray Ring Grommet NOTE: Repair kit does not include sprayhead grommet. Order as a separate item. 1 2 4 5 3 9 7 10 6 8 Parts List Sprayhead Assembly S05-054B Item 1 2 3 4 5 6 7 8 9 10 Part No.
PAGE 115
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Solenoid Valve Troubleshooting CAUTION: Problem: Cause: Solution: Turn off water supplies to unit before troubleshooting. An individual operating station fails to shut off and drips. There is debris trapped between the diaphragm and the valve seat. Remove debris between diaphragm and the valve seat. 1. Remove the three #8 Phillips-head screws that hold the solenoid valve assembly together.
PAGE 116
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Solenoid Valve S07-069 (closed body) REF. 1 2 3 4 5 6 7 8 9 8 7 8 QTY. 1 1 1 1 1 1 1 3 1 PART NO.
PAGE 117
Installation Instructions Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime+ Control TDB3103, WF3203 Thermostatic Mixing Valve Troubleshooting NOTE: Before attempting to troubleshoot the valve or disassemble the components, check for the following conditions: • If stop/check valves are used, make sure that they are fully open. • Make sure that the hot and cold inlet pipes are connected properly, and that there are no crossconnections or leaking stop/check valves.
PAGE 118
Terreon® Deep Bowl 36" Semi-Circular Washfountain with TouchTime® Metering Control TDB3103, WF3203 Installation Instructions Vernatherm™ Thermostatic Mixing Valve (S01-524) Repair Kit S65-259 Item Qty Description 5 1 Thermostat 7 1 O-Ring 8 1 O-Ring 10 Nut 3/8-24 Hex Jam 9 Cap 8 O-Ring 7 O-Ring 6 Stem 5 Thermostat 4 Piston 3 Spring 2 Seal Cup 1 Valve Body Strainer 11 (173-028) Figure 13 24 2/12/07 Bradley Corporation • 215-1579 Rev.