Specifications

ManualsBrandsBradley ManualsHome building and DecorTerreon TDB3104

TDB3104, WF3204 Installation

20 1/10/2013 Bradley • 215-1470 Rev. J; ECN 12-00-004

Sprayheads — Standard w/Neoprene Spray Ring Grommet

Parts List

Item Part No. Description

Sprayhead

Assembly

S05-054B

Repair

Kit

S45-051

Qty

1 125-001DE Neoprene Washer - Top 1 1

2 139-031 Sprayhead Manifold 1 —

3 124-001AL Washer 3 4

4 160-211 Carriage Bolt 3 4

5 115-061 Sprayhead - Top 1 —

6 116-008 Sprayhead - Bottom 1 —

7 124-001AT Washer 3 4

8 161-025 Nut 3 4

9 124-020D Sprayhead Grommet - Semi-Circle 1 —

10 125-001DF Neoprene Washer - Bottom 1 1

Sprayhead Service Suggestions

Problem Possible Cause Solution

Water splashes over the

rim of the bowl.

Foreign matter has reduced

the size of the sprayhead slots,

causing greater pressure at the

open slots.

Clean the sprayhead:

1. Disassemble the sprayhead and dislodge any dirt, lime build-

up and foreign debris with a wire brush.

2. Sprayheads with rubber grommet spray rings may be cleaned

by rubbing a coin over the grommet.

3. Throttle down the volume control (water spray should strike

the bowl without splashing outside of the bowl).

Water flow diminishes

from the sprayhead.

Strainer portion of the stop-

strainer-check valve is plugged.

Remove and clean the strainer screen from the stop-strainer-check

valve.

Repair kit does not include sprayhead

grommet. Order as a separate item.

The sprayhead shown above includes a perforated neoprene spray ring grommet that is self-cleaning. The

water pressure flexes the spray holes which slows accumulation of foreign matter and tends to “break loose”

any such deposits that may have accumulated.