Specifications

Installation TDB3104, WF3204
Bradley • 215-1470 Rev. J; ECN 12-00-004 1/10/2013 15
H
C
A
Loosen Cap Screw about 1/4" (4-6 turns)
and lift up cover (do not remove).
B
Using cover, turn cartridge gently until
desired water temperature is reached. Do
not turn past stops as this may damage
unit. Push cover down and tighten screw.
This valve is NOT factory preset. Upon installation, the temperature of this
valve must be checked and adjusted to ensure delivery of a safe water
temperature. Water in excess of 110°F (43°C) may cause scalding.
7
Adjust the Temperature
C
Clean sprayhead if necessary. Adjust the
volume control to control the flow of water.
D
Attach pedestal access panel and kick
plate with hardware provided.