Specifications

TDB3104, WF3204 Installation
14 1/10/2013 Bradley • 215-1470 Rev. J; ECN 12-00-004
6
Valve and tubing connections
Flush supply lines before making connections.
Do not apply pipe sealant to compression fittings.
A
Attach hot and cold flexible supply lines to
mixing valve assembly, two places. Make
sure the hot supply is connected to the hot
inlet on the valve (marked with the letter "H")
and the cold supply is connected to the cold
inlet on the valve (marked with the letter "C").
B
Hang valve assembly on pedestal valve
bracket.
C
Use wire tie to secure valving to valve
bracket.
Valve Bracket
3/8" Tube from
Sprayhead
Flexible
Hosing
Hot
Supply
Pedestal
Rear
Flexible
Hosing
Cold
Supply
Thermostatic
Mixing Valve
Volume
Control
D
Turn supplies on. Open stop valves
completely. Open volume control valve
completely and check piping installation for
leaks.
E
Push actuator button until air is purged from
the lines.