Specifications

TDB3104, WF3204 Installation
12 1/10/2013 Bradley • 215-1470 Rev. J; ECN 12-00-004
5b
Air Metering Valve Assembly for B Drain and H Drain Units with
Tie Pipe Option
A
Install hemmed end (not sharp end) of
support tube with gasket onto bowl.
B
Place sprayhead with 3/8" tubing onto
support tube. Run the tubing down through
the support tube and connect to valve tube
connector. Make sure the spray holes point
away from the wall.
C
Insert the 1-1/2" vent pipe (supplied by
installer) down through the support tube and
thread into vented trap.
Cover
Actuator
Module
Assembly
Sprayhead
Tie Bar
Supply Tube
Section View of
B/H Unit Assembly
Top Cover
(107-185 (B))
(107-048 (H))
Sprayhead
(S05-054B)
Module
Cover
Drain
(S45-273)
Terreon
®
Semi-Circular Bowl
(Part No. Varies with color
of bowl. Contact your local
Bradley Rep for assistance)
Access Panel
(186-1456)
Valve Assembly
Standard Pedestal Assembly
(S17-259)
TAS Pedestal Assembly
(S17-345)
Semi-Circ. Bowl Pre-Pack
(S45-1523)
Support
Tube Gasket
(125-011)
Support Tube
STD (S57-005)
TAS/JUV (S57-006)
1/8" Air Tubes
Actuator Module
Assy. (S65-134)
1-1/2" Vent Pipe
Vented Trap
(111-024)
Tie Bar Pre-Pack
(S45-056)
B/H
(B shown)