Specifications

Installation TDB3104, WF3204
Bradley • 215-1470 Rev. J; ECN 12-00-004 1/10/2013 11
5a
Air Metering Valve Assembly for A Drain and O Drain Units
without Tie Pipe Option continued...
D
Place the actuator module assembly on top of
sprayhead. Rotate until actuator module locks in
with tie bar. Drop 1/8" diameter tube down to valve
assembly and connect to the air valve. Make sure
air valve push button is facing away from the wall.
Skip to step F for units without soap.
E
For units with soap option, install the spacer, soap
dispenser and cover using the third tie rod (8-5/8"
long) and second coupling nut as shown. Secure
with acorn nut and set screw.
F
Secure actuator module cover and top cover with
sprayhead restraining bracket, acorn nut and set
screw.
G
Connect supply stops onto stub-outs. Connect
flexible hoses to supply stops.
Unit with "O" Drain and Actuator Module
Shown, Also Available with "A" Drain
Top
Cover
Soap
Dispenser
8-5/8" Tie Rod
Spacer
Coupling
Nut
Module
Cover
4-1/4" Tie Rod
Actuator Module
Assembly
(S65-134)
Coupling
Nut
Tie Bar
Sprayhead
(S05-054B)
Standard Support Tube
(S57-005)
TAS/Juvenile Support Tube
(S57-006)
Standard Tie Rod
21-5/8"
Juvenile Tie Rod
18-1/8"