Specifications

TDB3104, WF3204 Installation
8 1/15/2013 Bradley • 215-1578 Rev. D; ECN 12-00-004
CAUTION! Bowl surface is very smooth. Approximate
weight of bowl is 146 pounds (model TDB3104),
136 pounds (model WF3204) or 101 pounds (model
TDB3104/JUV). Handle with Care!
2
Bowl/Pedestal Mounting and Assembly
A
Position the pedestal at desired location and
mark the position of the (2) pedestal wall
mounting locations and (2) pedestal floor
mounting locations.
TAS OPTION: Place TAS spacer on floor
over the mounting holes. Place pedestal on
top of the spacer.
B
Secure pedestal to wall and floor with
suitable fasteners, 1/2" anchors and bolts
(supplied by installer).
C
Using two to three people, carefully lift bowl
onto pedestal.
D
Position the bowl so that the threaded rods
in the bowl mate with the slotted holes in
the pedestal.
E
Using 1/4" wing nuts and washers, secure
the bowl to the pedestal, three places.
Top View
Drain
Front View
Place Hands
Here When
Lifting Bowl
Threaded Rod
(Secured by 1/4"
wing nut and
washer)
Pedestal
Floor Mounting Locations
Wall
Mounting
Locations
Place Hands
Here When
Lifting Bowl
3
Installing Drain Spud in Bowl
A
Loosely attach the drain spud to the bowl
with the locknut and washer.
B TRAP OPTION: attach B trap to drain spud.
Tie Pipe OPTION: attach tie pipe bracket to
drain spud.
B
Tighten the spud and lock nut against the
bowl.
C
Secure the strainer to drain spud with the
screws provided.
D
Connect spud (or B Trap or Tie Pipe Bracket)
to drain.
Seal between drain spud and drain hole with
plumber’s putty (supplied by installer).
Strainer (S45-067)
Spud (112-015)
Bowl
Washer (142-068)
Locknut (161-021)
Drain Pre-Pack
(S45-273)