Specifications

Installation TDB3104, WF3204
Bradley • 215-1578 Rev. D; ECN 12-00-004 1/15/2013 13
5b
TouchTime Valve Assembly for B and H Units and Units with Tie
Pipe Option continued...
D
Place the TouchTime module assembly on top of
sprayhead. Rotate until TouchTIme module locks
in with tie bar. Drop TouchTime module wires
down the support tube. Make sure TouchTime
push button is facing away from the wall.
Skip to step F for units without soap.
E
For units with soap option, slide the spacer and
soap dispenser over the 1-1/2" pipe.
F
Position the upper tie bar slightly below the module
or soap dispenser and fasten securely to vent pipe
with set screws provided. Secure top cover to tie
bar with two cap screws provided.
G
Connect supply stops onto stub-outs. Connect
flexible hoses to supply stops.
Valve Assembly
(S45-2504)
Do not apply pipe sealant to
compression fittings.
Unit with "H" Drain and Actuator Module
Shown, Also Available with "H" Drain
Top
Cover
Soap
Dispenser
Spacer
Module
Cover
TouchTime Module
Assembly
(S83-180)
Tie Bar
Sprayhead
(S05-054B)
Support Tube
STD (S57-005)
Volume Control
Valve
Flexible
Hose
Stop
Thermostatic Mixing
Valve Assembly
3/8" Tube to
Sprayhead
Solenoid Valve
Assembly