Troubleshooting guide

Bradley Washfountains Parts and Service Guide
NOTE: Flush supply lines before making connections.
Follow the procedures below and refer to Figures below when installing tubing to ensure that
you achieve a leakproof seal.
• Using a sharp razor, cut tubing squarely and remove any burrs. DO NOT pinch or crush end
of tubing.
• Loosen nut on fitting. Moisten end of tube and push into fitting until it is firmly seated.
Tighten nut to secure tube to fitting (make sure nut is securely tightened).
• If connector leaks, reseat tubing according to above procedure. If leaking persists,
replace male connector, or call your Bradley representative for assistance.
SPRAYHEAD
TUBING
NUT
MALE
TUBE
CONNECTOR
269-626
TUBING
Sprayhead Tubing Connections
2910 Burnet Ave ~ Syracuse, NY 13206 ~ [phone] ~ Fax: [phone] ~ email: sales@vdcspecialtypl umbingparts.com
VDC SPECIALTY PLUMBING PRODUCTS W eb: vdcspecialtyplumbingparts.com
VESCERA DISTRIBUTING COMPANY, Inc.
44 FOR MORE INFORMATION OR TO PLACE AN ORDER CALL 800-875-7952