Installation manual

Terreon® 54" Circular Deep Bowl Washfountain with Air Metering Valve
TDB3108, WF3208 Installation Instructions
Bradley Corporation • 215-1471 Rev. E; EN 06-915B2 4/6/2007
Pre-Installation Information
IMPORTANT: Read this entire installation manual to ensure proper installation.
IMPORTANT: Flush all the water supply lines before making connections.
IMPORTANT: Main water supply to the unit should be ON at all times.
IMPORTANT: This installation manual and parts list should be filed by the owner’s
maintenance department.
Cylindrical air valve
The sprayhead is controlled by a pushbutton cylindrical air valve, allowing the user to activate a
flow of water.
Supplies required for installation:
• (4) lag bolts, screws or other fasteners to anchor washfountain pedestal to floor
• 1" hot and cold water supply lines and fittings (refer to rough-ins on pages 7-8)
• Reducing fittings and 1/2" nom. copper tubing supply lines for types with supplies
from above
• Standard P-trap (refer to rough-ins on pages 7-9) (vented trap supplied by Bradley
when required)
• 2" drain lines and fittings (refer to rough-ins on pages 7-8)
• Teflon tape or pipe dope
• 1-1/2" vent or tie pipe on types vented through washfountain column (see page 9 for
lengths required)
Terreon® Circular Washfountain Warranty
Product warranties may be found under “Product Information” on our website at www.bradleycorp.com