Installation manual

Terreon® 54" Circular Deep Bowl Washfountain with with TouchTime
®
Control
Installation Instructions TDB3108, WF3208
Bradley Corporation • 215-1577 Rev A; EN 06-915B 94/6/2007
Centerline of
Washfountain
Centerline of
Washfountain
Centerline of
Washfountain
See rough-ins
on Pages 7-8
for dimensions
not shown
Types B, H
Types A, O
With Tie Pipe
Bracket Option
Types A, O
2" NPT Coupling if Tie
Pipe is not required
(Supplied by Installer)
Vent
or
Tie Pipe
(Supplied by Installer)
Vent
or
Tie Pipe
(Supplied by Installer)
Vented Trap
(111-024)
Optional
Tie Pipe Bracke
t
(S70-082)
4"
(102)
4"
(102)
B – See Table 1
B – See Table 1
B – See Table 1
4"
(102)
Installation Instructions
Step 1: Installing the drain
1. Rough in supply and drain piping as required for your installation (see pages 7-8 for rough-ins
of the optional installations).
2. Assemble the drain to the dimension shown in Figure 3 for the bowl size of the washfountain
you are installing.
NOTE: All piping shown in dotted lines to be supplied by installer.
Figure 3
Dim Standard Height Juvenile Height TAS
B 23-3/8" (594mm) 22-1/2" (572mm) 24-1/2" (622mm)
Table 1 — “B” Trap Dimensions