Installation manual
TDB3108, WF3208 Installation
16 4/3/2013 Bradley • 215-1577 Rev. B; ECN 13-00-001
Reducer plugs are available for use with fine granulated
soap to reduce the flow.
Valves can be changed from powdered to liquid by plugging
the innermost, or “bearing” hole with rubber plug, part number
125-001AK. To change from liquid to powdered, the plug must
be removed. If none is present, it will be necessary to drill out
the bearing hole with a 1/2" or 5/8" drill. The plastic container
configuration forms a natural template for locating the bearing hole.
Item Part No. Description S09-010A
Qty
1 S62-002 Agitator / Slide Assembly 1
2 160-069 Screw, 1/4-20 RD 1
3 142-002X Washer, 1/4 Split-Lock 1
4 192-004 Lever - Powdered Soap 1
Soap Valve - Powdered Parts List
Soap Valve - Powdered S09-010A
3
2
1
4
Parts List - Soap Valves (S09-007S, S09-057S, S09-010A)
Lotion soap will clog liquid soap valves. Use only lotion soap
valves with lotion soap.
This valve delivers a measured amount of soap with each upward
stroke. The soap dispenser has been standard on washfountains
since 1983 and is not well-suited for very thick lotion soaps.
Item Part No. Description Attaching Parts
S09-007S
Qty
1 118-025 Valve Body 1
2 110-007 PackingNut 1
3 135-001L Spring 1
4 125-001BU Washer 1
5 119-028 Plunger 1
* 161-014 Nut 1
* 124-001BV Washer 2
* 142-002AH Washer - Stainless Steel 1
* Not Illustrated
Soap Valve - Liquid Parts List
Item Part No. Description Valve Assembly
S09-057
Attaching Parts
S09-057S
Qty
1 S09-040 Valve 1 1
2 S53-045 Adaptor 1 1
3 125-001AN Stopper — 1
4 159-114 Reinforcing Plate — 1
5 160-176 Screw — 1
6 124-001AT Washer — 1
7 124-001BV Washer — 1
8 110-057 Nut — 1
Soap Valve - Lotion Parts List
Soap Valve - Liquid S09-007S
Soap Valve - Lotion S09-057S
1
2
3
4
5
7
8
5
6
1
3
5
4
2
4
3
1
2
2
3
1