Installation manual

TDB3108, WF3208 Installation
10 4/3/2013 Bradley • 215-1577 Rev. B; ECN 13-00-001
4b
Assemble TouchTime
®
– B and H Units without Tie Pipe Option (B Shown)
A
Installhemmedend(notsharpend)of
support tube with gasket onto bowl.
B
Connect1/2"supplytubingtosprayhead
with3/8"NPTto1/2"tubeconnectorand
place sprayhead onto support tube. Run the
tubing down through the support tube and
connect to valve tube connector.
C
Insertthe1-1/2"ventpipe(suppliedby
installer)downthroughthesupporttubeand
thread into vented trap.
Cover
Actuator
Module
Assembly
Sprayhead
Tie Bar
Supply Tube
Section View of
B/H Unit Assembly
Tie Bar Pre-Pack
(S45-056)
Cover
(107-185 (B))
(107-048 (O))
Sprayhead
(S05-054)
Drain (S45-273)
Terreon
®
Deep Bowl
(Part No. Varies with color of bowl.
Contact your local Bradley Rep for
assistance)
Access Panel
(186-1191)
Valve Assembly
(S50-368)
Pedestal Assembly
(S17-242)
1/2" Supply Tube
Vented Trap
(111-024)
Support Tube Gasket
(125-011)
Support Tube
STD (S57-005)
TAS/JUV (S57-006)
TouchTime Module
Assembly (S83-179)
B/H
(B shown)