Specifications

Classic Circular 36"/54" Washfountain with Touch Time™ Control
Installation Instructions WF2605, WF2608 Terrazzo – WF2705, WF2708 Stainless Steel
15Bradley Corporation • 215-1518 Rev. C; EN 06-915B 4/6/2007
Installation Instructions continued . . .
Step 6: Installing the valve assembly
NOTE: Flush supply lines before making connections.
1. Connect the stop-strainer-check valves, mixing valve, volume control valve, and solenoid valve
assembly as shown in Figure 10.
2. For overhead supply lines, install 1/2" nominal copper tubing by passing lines through holes in
the dispenser cover and down through the support tube.
3. Install the valving assembly, using suitable fittings, to the supplies as shown in Figure 10 at the
approximate height indicated in Table 2.
4. Connect the 1/2"plastic tubing from the sprayhead to the tube connector on the solenoid valve.
Model Number Type A Type B Type O Type H
Standard Height 9" (229mm) 6-3/16" (157mm) 9" (229mm) 6-3/16" (157mm)
Juvenile Height 5-1/4" (133mm) 3-7/16" (87mm) 5-1/4" (133mm) 3-7/16" (87mm)
Table 2 — Distance from 1/2" Supply to Finished Floor
1/2" Supply
Supply Tube
Reducer (269-851)
1/2" Supply
Manual Mixing
Valve (S01-038)
TMA Optional (S01-525)
Distance
To Finished
Floor
(See Ta ble 2)
Solenoid Valve
(S08-055)
Volume Control
Valve (S02-045)
Tailpiece Nut (110-005)
Fiber Washer (124-001AF)
Stop-Strainer-Check
Valve (S60-003)
Figure 10