Specification Sheet

SA37
Security Clothes Hook
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 10/23/2013
This information is subject to change without notice.
Bradley_Hook_SA37
Security clothes hook:
 Model SA37 – Front-Mounted Bradex
®
Product Materials
SAFETY HOOK: 11 gauge stainless steel bracket with 7 gauge stainless steel
hook. Hook is secured to bracket with torx-head screw and rubber friction washers.
Unit manufactured to release when more than 30 lbs. of force is applied. Tension
adjustment can be made by use of torx driver. Any adjustments made to the tension of
the hook should allow the hook to release between 10 and 30 lbs. of force.
Installation
Verify all rough-in dimensions prior to installation. Unit supplied with ¼" - 20 x 1"
T27 torx head machine screws for installation to wall anchors (not included).
1"
(25mm)
3"
(76mm)
3⁹⁄₁₆"
(90mm)
½"
(13mm)
4⁵⁄₁₆"
(109mm)
³⁄₈"
(10mm)