Specification Sheet

SA12
Security Recessed Toilet Tissue Roll Holder
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Orders composed of products indicated as Bradex
®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 1 10/22/2012
This information is subject to change without notice.
Bradley_TPDispenser_SA12
Security recessed toilet tissue roll holder:
 Model SA12 – Front Mounted Bradex
®
Product Materials
FLANGE: 14 gauge stainless steel with exposed surfaces in bead-blasted satin finish.
Flange is welded to holder to ensure a tight fit to wall surface.
HOLDER: 16 gauge stainless steel with exposed surfaces in bead-blasted satin finish.
One-piece drawn, seamless construction.
Capacity
One standard roll of toilet tissue up to 5-3/8" diameter.
Installation
Verify all rough-in dimensions prior to installation. Requires circular rough wall opening
5-3/4" diameter x 4-1/4"D. Unit supplied with ¼" - 20 x 1" T27 torx head machine screws
for installation to wall anchors (not included).
Guide Specification
Recessed security toilet tissue roll holder shall be fabricated of stainless steel with
exposed surfaces in bead-blasted satin finish. Flange shall be constructed of 14 gauge
stainless steel and shall be welded to holder. Holder shall be constructed of 16 gauge
stainless steel and shall be one piece, drawn, seamless construction.
Overall dimensions: 7"W x 7"H x 4-1/2"D.
ADA Compliant
Consult local and national accessibility codes for proper installation guidelines.
Conformity and compliance to local and national codes is the responsibility of the
installer.
1/2"
(13 mm)
Ø 6-1/2"
Outside of Rim
3-1/2"
(90 mm)
3-15/16"
(100 mm)
7"
(178 mm)
3-1/2"
(90 mm)
7"
(178 mm)
6"
(152 mm)
1/2"
(13 mm)
6"
(152 mm)
5-1/2"
(140 mm)
5-3/4" Dia. (146 mm)
Wall Opening
Ø 5-3/8"
Inside