Specification Sheet

© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 2 of 2 1/23/2018
This information is subject to change without notice.
Bradley_ShowerAccessories_1CBentArm
B1
J1
Standard Selection
Showerhead Type (select one):
¨1C-S115
¨1C-S120
¨1C-D1
¨1C-ES1
¨1C-B1
¨1C-J1
S24-022WE15 Standard Institutional Showerhead (1.5 GPM/5.7 LPM)
S24-022WE20 Standard Institutional Showerhead (2.0 GPM/7.6 LPM)
S24-139WE15 Deluxe Showerhead (1.5 GPM/5.7 LPM)
S24-139WE20 Economy Soft Flow Showerhead (2.0 GPM/7.6 LPM)
S24-183WE15 Axis Showerhead (1.5 GPM/5.7 LPM)
S24-181WE15 Multi Jet Showerhead (1.5 GPM/5.7 LPM)
Optional Selections*
Volume Control Type (select one):
¨AKV Allen Key Volume Control
¨LHV Lever Handle Volume Control
¨NONE No Volume Control
Ball Joint Type (select one):
¨LBJ Lockable Ball Joint
¨NONE No Ball Joint
* Only available on S115 and S120 showerheads.
Verify all rough-in dimensions prior to installation.
Consult local and national codes: conformity and compliance to local and national codes is the
responsibility of the installer.
2.5 GPM showerhead flow rate does not meet California Energy Commission 20 CCR T.20,
Div. 2, 1601-1609.
1C
Showerheads - Bent Arm and Flange
Economy Soft Flow Showerhead (ES1)
Features
• Bent arm and flange
• Ball joint
• 2.0 GPM (7.6 LPM) flow control
Standards
Showerhead meets ANSI A112.18.1M flow requirements.
ES1
Basic Brass Showerhead (B1)
Features
• Bent arm and flange
• Ball joint
• T-Handle Adjustable spray pattern
• 1.5 GPM (5.7 LPM) flow control
Standards
Showerhead meets ANSI A112.18.1M flow requirements.
Multi-Jet Showerhead (J1)
Features
• Bent arm and flange
• Ball joint
• Multi-Jet Spray
• Lever Handle Adjustable spray pattern
• 1.5 GPM (5.7 LPM) flow control
Standards
Showerhead meets ANSI A112.18.1M flow requirements.