Specification Sheet

© 2018 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 3 of 4 1/23/2018
This information is subject to change without notice.
Bradley_ShowerAccessories_1CWallArm
Shower Accessories (1C Showerheads)
Showerheads Anchor Plate/
Back Plate
Screws for mounting showerheads, anchor plates and back plates are furnished by Bradley.
1/4-20 x 1-1/4" stainless steel Allen socket flat head screws are furnished for mounting
anchor plates or heads directly to wall.
If anchor plates are used, 1/4-20 x 5/8" stainless steel Allen socket flat head screws are
furnished for attaching head to anchor plates. If back plates are required, Bradley furnishes
stainless steel nuts, washers and threaded rods of sufficient length to suit wall thickness.
Anchor Plates
(suffix AP and application)
Provides additional mounting strength for built-in shower components. 3/16" cadmium-
plated steel plate furnished with countersunk mounting holes and 1/4-20 x 1-1/4" machine
screws for installation.
Back Plate
(suffix BP and application)
Allows most secure anchorage of wall-mounted components. 3/16" cadmium-plated steel
plate furnished with couplings, studs and nuts. Will accommodate 8" wall thickness.
ANCHOR PLATE
FOR SHOWERHEADS
BACK PLATE
FOR SHOWERHEADS
1C
Showerheads – Institutional Wall Arm